Rototiller/Manufacturing Instructions/Piece Parts
Jump to navigation
Jump to search
| |||||||||||||||||||
Overview
Here are the additional piece parts are required to be fabricated to complete the final assembly.
Tools Required
Materials Required
| TYPE | SIZE | QTY. |
|---|---|---|
| Flat | 1/2" X 6" x 8" | 1 |
| Flat | 1/8" X 48" X 40" | 1 |
| Tubing | 2" X 2" X 0.25"THK x 24" | 2 |
| Round | ø1.875" x 52" | 1 |
| Round | ø0.5" x 50" | 1 |
| Round | ø0.5" x 4" | 2 |
| Pipe | 0.5"ID X 0.75"OD x 2" | 8 |
Parts List and Drawings
| PART NAME | DESCRIPTION | QTY. |
|---|---|---|
| Small Tube | Connects bucket welded assembly to front frame | 2 |
| Plate, Motor Mount | Additional mounting plate for motor | 1 |
| Shaft | Main spinning shaft | 1 |
| Rod, Hinge | Long rod for cover plate hinge | 1 |
| Rod, Pin | Pins for locking in the tube between the bucket and front frame at a set distance | 2 |
| Top Plate | Large plate to cover the bucket | 1 |
| Hinge Pipe | Small pipe used to create hinge between top plate and bucket | 8 |
Fabrication and Assembly Instructions
- Cut pieces as per piece part drawings.