Prototypes Built and Cost
Jump to navigation
Jump to search
Discussion
- The multiples of machines are replications, marked with green asterisks. These are:
- James Slade - first ever replication, The Liberator, Oct. 2011 - Replication#James_Slade:_Austin.2C_Texas.2C_USA
- D&H Tractors - first LifeTrac replication - Replication#Daniel_.26_Hayden:_Pasadena.2C_California.2C_USA
- Tom Griffing - first Power Cube replication -
- Dan from Texas - second replication of The Liberator. April 2012.
- Charles Liptaak - The Liberotor, Power Cube. May 2012.
- There are also other partial replications not shown in above graph:
- James Wise - built a controller for The Liberator, and produced several solenoid driver electronics boards for the same, 2010 and 2011
- William Neal et al. - CEB Press in production - Cherrypicking from Nanjing, China (if you understand the agriculture insight). This one is not considered as built until photos arrive. Electronics are built. See China Replication
- Luke Isaman - replication of carriage of CNC Torch Table Prototype I