File:CNC Torch 1708 Motor interface.fcstd
Jump to navigation
Jump to search
CNC_Torch_1708_Motor_interface.fcstd (file size: 186 KB, MIME type: application/zip)
Warning: This file type may contain malicious code. By executing it, your system may be compromised.
Notes
- Oct 2 2019 - Need to fix version history. When a new file is uploaded, downloading goes only to the file below it. I verified it twice - the last file loads the previous file, and there's no way to download the latest file, until a new file is loaded above that. Does this fix itself? Will check tomorrow if the latest file updated to the correct file. Issue is persistent after checking on Oct 3.
- 11 Oct 2017 has nut catcher holes that are too deep.
- October 10 version is cleaned of underlying shapes to allow a boolean trimming
- 217k version has sketches. The ones after that are generated from the 217k file by removing sketches and adding a pocket to extend the nut catcher hole.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 01:55, 3 October 2019 | (186 KB) | Marcin (talk | contribs) | Retry. |
| 01:53, 3 October 2019 | (186 KB) | Marcin (talk | contribs) | Deepened belt hole for 15 mm belt. | |
| 01:43, 3 October 2019 | (159 KB) | Marcin (talk | contribs) | This is the 2016 original from Michel, for 6 mm belt, to be reworked for 15 mm belt. | |
| 01:41, 3 October 2019 | (159 KB) | Marcin (talk | contribs) | This is the 2016 original from Michel, for 6 mm belt, to be reworked for 15 mm belt. | |
| 07:55, 11 October 2017 | (61 KB) | Marcin (talk | contribs) | Updated rod hole from 0.9 to 1.0" | |
| 07:52, 11 October 2017 | (65 KB) | Marcin (talk | contribs) | ||
| 06:50, 11 October 2017 | (81 KB) | Marcin (talk | contribs) | Version with nut cather bolt holes reaching beyond nut catcher. | |
| 21:53, 10 October 2017 | (54 KB) | Marcin (talk | contribs) | Narrowed it down to make 2 fit on a Lulzbot Mini 6" print bed. | |
| 00:30, 7 October 2017 | (217 KB) | Lex Berezhny (talk | contribs) | Widened belt hole from 5.08mm to 13mm to fit the double pulley. | |
| 02:41, 16 August 2017 | (210 KB) | Polemidis (talk | contribs) |
You cannot overwrite this file.
File usage
The following 4 pages use this file: