File:Peg 8mm rods.stl: Difference between revisions
Jump to navigation
Jump to search
(Marcin uploaded a new version of File:Peg 8mm rods.stl) |
No edit summary |
||
| Line 1: | Line 1: | ||
=Notes= | |||
*Peg was generated by a Boolean subtract in last version prior to 8/23/18. That is less editable, so I made the hole a straight through pocket on the small side - using the standard workflow of creating and extruding sketches on flat sides. An example of design-for-manufacturing mindset - where features are holes and straight through - as opposed to more advanced Boolean subtractions which outside of 3D printing cannot be made easily. - MJ | |||
Revision as of 20:54, 23 August 2018
Notes
- Peg was generated by a Boolean subtract in last version prior to 8/23/18. That is less editable, so I made the hole a straight through pocket on the small side - using the standard workflow of creating and extruding sketches on flat sides. An example of design-for-manufacturing mindset - where features are holes and straight through - as opposed to more advanced Boolean subtractions which outside of 3D printing cannot be made easily. - MJ
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 05:06, 3 November 2019 | (3 KB) | Marcin (talk | contribs) | |
| 03:35, 3 November 2019 | (3 KB) | Marcin (talk | contribs) | 1 mm wider peg for new carriage with widened peg hole | |
| 20:51, 23 August 2018 | (2 KB) | Marcin (talk | contribs) | Peg srengthened with thicker walls, see FreeCAD file description. | |
| 17:09, 13 April 2017 | (2 KB) | Marcin (talk | contribs) |
You cannot overwrite this file.
File usage
The following 8 pages use this file: