File:Axis half carriage.fcstd: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
(Marcin uploaded a new version of File:Axis half carriage.fcstd) |
||
| (6 intermediate revisions by the same user not shown) | |||
| Line 5: | Line 5: | ||
*13.7 mm were taken from each side to get about 27.5 mm total width - where the bearing socket is 24.5 mm long to fit 24 mm bearing: | *13.7 mm were taken from each side to get about 27.5 mm total width - where the bearing socket is 24.5 mm long to fit 24 mm bearing: | ||
[[File:lmuu.jpg]] | [[File:lmuu.jpg|300px]] | ||
Latest revision as of 22:23, 21 March 2020
Notes
- Detailed file. Hacked full carriage.
- File was generated by taking the full Carriage, then turning it into a dumb object, and cutting it up using Pocket in Part Design to generate 2 parts. The two parts are the left and right side, with middle cut out. Specifically, width is 52, so each quarter is 13 mm.
- 13.7 mm were taken from each side to get about 27.5 mm total width - where the bearing socket is 24.5 mm long to fit 24 mm bearing:
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 22:23, 21 March 2020 | (9 KB) | Marcin (talk | contribs) | Reverted to version as of 02:36, 27 February 2019 (UTC) |
| 02:36, 27 February 2019 | (9 KB) | Marcin (talk | contribs) | Simplified, no sketches. | |
| 02:35, 27 February 2019 | (19 KB) | Marcin (talk | contribs) | Half carriage, full clamshell. Simple with sketches. | |
| 02:23, 27 February 2019 | (169 KB) | Marcin (talk | contribs) | Final version. Needs 2 halves to be closer, there may be small gap. | |
| 02:21, 27 February 2019 | (47 KB) | Marcin (talk | contribs) |
You cannot overwrite this file.
File usage
The following 5 pages use this file: