File:Axis half carriage.fcstd
Axis_half_carriage.fcstd (file size: 9 KB, MIME type: application/zip)
Warning: This file type may contain malicious code. By executing it, your system may be compromised.
- Detailed file. Hacked full carriage.
- File was generated by taking the full Carriage, then turning it into a dumb object, and cutting it up using Pocket in Part Design to generate 2 parts. The two parts are the left and right side, with middle cut out. Specifically, width is 52, so each quarter is 13 mm.
- 13.7 mm were taken from each side to get about 27.5 mm total width - where the bearing socket is 24.5 mm long to fit 24 mm bearing:
Click on a date/time to view the file as it appeared at that time.
|current||22:23, 21 March 2020||(9 KB)||Marcin||Reverted to version as of 02:36, 27 February 2019 (UTC)|
|02:36, 27 February 2019||(9 KB)||Marcin||Simplified, no sketches.|
|02:35, 27 February 2019||(19 KB)||Marcin||Half carriage, full clamshell. Simple with sketches.|
|02:23, 27 February 2019||(169 KB)||Marcin||Final version. Needs 2 halves to be closer, there may be small gap.|
|02:21, 27 February 2019||(47 KB)||Marcin|
- You cannot overwrite this file.