D3D Universal Software: Difference between revisions
Jump to navigation
Jump to search
| Line 12: | Line 12: | ||
* [[File:5high_cube.zip]] (contains gcode file) | * [[File:5high_cube.zip]] (contains gcode file) | ||
* size: 1x1x5 cm (5 cm high, square base of 1 cm each side, hollow and open at the top) | * size: 1x1x5 cm (5 cm high, square base of 1 cm each side, hollow and open at the top) | ||
* for '''1mm''' nozzle (see [[ | * for '''1mm''' nozzle (see [[D3D_Universal_Build_Manual#First_Run_Procedure_and_Quality_Control]]) | ||
* needs to be unziped and load unto SD card | * needs to be unziped and load unto SD card | ||
* visualize with a gcode viewer, eg [https://ncviewer.com/] | * visualize with a gcode viewer, eg [https://ncviewer.com/] | ||
Revision as of 05:33, 30 June 2020
Software
- Printer - Marlin, Lulzbot Cura, OSE Linux, FeF Microfactory printer profiles
Plotter File Generation
- Plotter - Using Inkscape to Generate Gcode
Code
Firmware
- Marlin - File:Marlin Universal.zip
- Cura Settings File:D3duniversal 8.ini
Sample First Print File
- File:5high cube.zip (contains gcode file)
- size: 1x1x5 cm (5 cm high, square base of 1 cm each side, hollow and open at the top)
- for 1mm nozzle (see D3D_Universal_Build_Manual#First_Run_Procedure_and_Quality_Control)
- needs to be unziped and load unto SD card
- visualize with a gcode viewer, eg [1]
- ambitious for a first print!
- add your result here [2]