Revision as of 00:46, 21 December 2020

Basics

Can also be written as "Tyre" but more google results for Tire
The most common type of tire
Often a form of Municipal Solid Waste, and can't be recycled easily as they are a Thermoset Plastic...that has also been Vulcanized
- Given how Sulfur Vulcanization is common, if Incinerated or Pyrolysed the gas stream would REQUIRE a Gas Scrubber , abd sulfur may contaminate the fuel/chemicals produced
Very durable
Waterproof if cut into sections and/or made into a sheet
From the wikipedia page:
- "Tires can trap methane gases, causing them to become buoyant, or bubble to the surface. This 'bubbling' effect can damage landfill liners"
Can they be used as a Molecular Seive ?!?

Any good jigs?
Using a CNC Router or CNC Mill may work well
- Also recovered chippings (in accordance with the Cleaner Machining ) could be used as a source for Shredded Vulcanized Rubber Tires without the need for a Shredder

Need data on potential Leaching hazards
Also hard info on fumes from Incineration , Pyrolysis , or Laser Cutting / Torch Cutting

Rubber
Vulcanization
Rubberized Asphalt Concrete
Tire-Derived Fuel (Not reccomended (outside of at the end of a Life Cycle containing other uses) due to complexity, and better alternative use cases)
For More Information More Relevant For Conceptual Design/BOM's:

@@ Line 14: / Line 14: @@
 *Any good jigs?
 *Using a [[CNC Router]] or [[CNC Mill]] may work well
-**Also recovered chippings (in accordance with the [[Clean Machining]] ) could be used as a source for [[Shredded Vulcanized Rubber Tires]] without the need for a [[Shredder]]
+**Also recovered chippings (in accordance with the [[Cleaner Machining]] ) could be used as a source for [[Shredded Vulcanized Rubber Tires]] without the need for a [[Shredder]]
 ===Lasercutting===