Soil Pulverizer/Manufacturing Instructions: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 3: | Line 3: | ||
1 Tools and Materials | 1 Tools and Materials | ||
=[Rototiller/Manufacturing Instructions/Tools|Tools]= | =[[Rototiller/Manufacturing Instructions/Tools|Tools]]= | ||
2 | 2 | ||
| Line 18: | Line 18: | ||
1 | 1 | ||
=Overview= | =Overview= | ||
Revision as of 06:57, 28 December 2011
| |||||||||||||||||||
Wanted: This page needs to be modified to match the format of the Powercube summary page: http://opensourceecology.org/wiki/Power_Cube/Manufacturing_Instructions
1 Tools and Materials
Tools
2
2 Edit
https://docs.google.com/spreadsheet/ccc?key=0AlpsBarfpPkzdDFQd1ZMY21FS0NJdTJrekh4Rkltc1E
1
Overview
These pages provide instructions and information on manufacturing and assembling the Soil Pulverizer.
Note: All fabrication drawings are first draft and may contain errors. If you see any please add a note on the page for the correction.
Fabrication Steps
Complete all items in Parts Fabrication and then assemble them. Once the machine is assembled, you can paint it.
Parts Fabrication
The following steps can all be completed independently.
Assembly
Paint
- Cover the hydraulics and any other place that should not be painted.
- Check all external surfaces for sharp edges and smooth with angle grinder.
- Remove any surface rust with wire brush and / or sandpaper.
- Apply a thorough coating of paint to all steel surfaces.
- Allow 24 hours to dry before handling.