File:Motor interface.fcstd: Difference between revisions
Jump to navigation
Jump to search
(Polemidis uploaded a new version of File:Motor interface.fcstd) |
(Polemidis uploaded a new version of File:Motor interface.fcstd) |
(No difference)
| |
Revision as of 01:11, 28 April 2017
Version Notes
- Feb 18 version is missing the notch for the stepper motor connector, so the stepper motor doesn't fit as is.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 00:18, 1 June 2018 | (30 KB) | Marcin (talk | contribs) | Extruder mount with 8 mm distance sensor holder for the Titan Aero motor grab |
| 03:08, 29 May 2018 | (27 KB) | Marcin (talk | contribs) | Compounded version of last file. | |
| 23:33, 28 May 2018 | (29 KB) | Marcin (talk | contribs) | ||
| 01:11, 28 April 2017 | (377 KB) | Polemidis (talk | contribs) | moved the holes towards the center about 3mm Added side holes | |
| 02:35, 18 March 2017 | (353 KB) | Polemidis (talk | contribs) | fixed motor-hold holes size to fit M6 screw | |
| 12:18, 7 March 2017 | (353 KB) | Polemidis (talk | contribs) | increased cable adaptor cut lenght, moved the nut catchers | |
| 12:54, 6 March 2017 | (354 KB) | Polemidis (talk | contribs) | redesigned to correct orientation | |
| 20:48, 2 March 2017 | (358 KB) | Polemidis (talk | contribs) | 1mm wider motor cut | |
| 05:11, 2 March 2017 | (355 KB) | Polemidis (talk | contribs) | Adaptor cut made | |
| 14:03, 18 February 2017 | (341 KB) | Polemidis (talk | contribs) |
You cannot overwrite this file.
File usage
The following 6 pages use this file: