File:Peg 8mm rods.stl: Difference between revisions
Jump to navigation
Jump to search
(→Notes) |
(→Notes) |
||
| Line 1: | Line 1: | ||
=Notes= | =Notes= | ||
{{Hint|Need to resolve the bug. Last upload is correct, but it uploads the former version of the file from 2 versions ago. This means that 00:06, 3 November 2019 downloads 15:51, 23 August 2018. The 22:35, 2 November 2019 version the actual correct one.}} | {{Hint|Need to resolve the bug. Last upload is correct, but it uploads the former version of the file from 2 versions ago. This means that '''00:06, 3 November 2019''' downloads '''15:51, 23 August 2018'''. The '''22:35, 2 November 2019''' version the actual correct one.}} | ||
*On D3D v18.12, 95% works in PLA for tight fit, and 90% works to stick peg all the way in. Recommended: maybe 92% | *On D3D v18.12, 95% works in PLA for tight fit, and 90% works to stick peg all the way in. Recommended: maybe 92% | ||
*Peg was generated by a Boolean subtract in last version prior to 8/23/18. That is less editable, so I made the hole a straight through pocket on the small side - using the standard workflow of creating and extruding sketches on flat sides. An example of design-for-manufacturing mindset - where features are holes and straight through - as opposed to more advanced Boolean subtractions which outside of 3D printing cannot be made easily. - MJ | *Peg was generated by a Boolean subtract in last version prior to 8/23/18. That is less editable, so I made the hole a straight through pocket on the small side - using the standard workflow of creating and extruding sketches on flat sides. An example of design-for-manufacturing mindset - where features are holes and straight through - as opposed to more advanced Boolean subtractions which outside of 3D printing cannot be made easily. - MJ | ||
Revision as of 05:12, 3 November 2019
Notes
Hint: Need to resolve the bug. Last upload is correct, but it uploads the former version of the file from 2 versions ago. This means that 00:06, 3 November 2019 downloads 15:51, 23 August 2018. The 22:35, 2 November 2019 version the actual correct one.
- On D3D v18.12, 95% works in PLA for tight fit, and 90% works to stick peg all the way in. Recommended: maybe 92%
- Peg was generated by a Boolean subtract in last version prior to 8/23/18. That is less editable, so I made the hole a straight through pocket on the small side - using the standard workflow of creating and extruding sketches on flat sides. An example of design-for-manufacturing mindset - where features are holes and straight through - as opposed to more advanced Boolean subtractions which outside of 3D printing cannot be made easily. - MJ
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 05:06, 3 November 2019 | (3 KB) | Marcin (talk | contribs) | |
| 03:35, 3 November 2019 | (3 KB) | Marcin (talk | contribs) | 1 mm wider peg for new carriage with widened peg hole | |
| 20:51, 23 August 2018 | (2 KB) | Marcin (talk | contribs) | Peg srengthened with thicker walls, see FreeCAD file description. | |
| 17:09, 13 April 2017 | (2 KB) | Marcin (talk | contribs) |
You cannot overwrite this file.
File usage
The following 8 pages use this file: