Soil Pulverizer/Manufacturing Instructions

Materials

• Edit [1]

Overview

These pages provide instructions and information on manufacturing and assembling the Soil Pulverizer.

Note: All fabrication drawings are first draft and may contain errors. If you see any please add a note on the page for the correction.

Fabrication Steps

Complete all items in Parts Fabrication and then assemble them. Once the machine is assembled, you can paint it.

Parts Fabrication

The following steps can all be completed independently.

• Bucket
• Frame Pivot Hinge
• Arm Rest
• Shaft and Motor Frame
• Tines
• Coupler
• Additional Piece Parts

Assembly

Assembly

Paint

• Cover the hydraulics and any other place that should not be painted.
• Check all external surfaces for sharp edges and smooth with angle grinder.
• Remove any surface rust with wire brush and / or sandpaper.
• Apply a thorough coating of paint to all steel surfaces.
• Allow 24 hours to dry before handling.