Peg_8mm_rods.stl ‎(file size: 3 KB, MIME type: application/sla)

Warning: This file type may contain malicious code. By executing it, your system may be compromised.

Notes

{{Hint|Need to resolve the bug. Last upload is correct, but it uploads the former version of the file.

On D3D v18.12, 95% works in PLA for tight fit, and 90% works to stick peg all the way in. Recommended: maybe 92%

Peg was generated by a Boolean subtract in last version prior to 8/23/18. That is less editable, so I made the hole a straight through pocket on the small side - using the standard workflow of creating and extruding sketches on flat sides. An example of design-for-manufacturing mindset - where features are holes and straight through - as opposed to more advanced Boolean subtractions which outside of 3D printing cannot be made easily. - MJ

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	05:06, 3 November 2019	(3 KB)	Marcin (talk \| contribs)
	03:35, 3 November 2019	(3 KB)	Marcin (talk \| contribs)	1 mm wider peg for new carriage with widened peg hole
	20:51, 23 August 2018	(2 KB)	Marcin (talk \| contribs)	Peg srengthened with thicker walls, see FreeCAD file description.
	17:09, 13 April 2017	(2 KB)	Marcin (talk \| contribs)

You cannot overwrite this file.

The following 8 pages use this file: