File:Peg 8mm rods.stl
Jump to navigation
Jump to search
Peg_8mm_rods.stl (file size: 3 KB, MIME type: application/sla)
Warning: This file type may contain malicious code. By executing it, your system may be compromised.
Notes
{{Hint|Need to resolve the bug. Last upload is correct, but it uploads the former version of the file from 2 versions ago. This means that 00:06, 3 November 2019 downloads 15:51, 23 August 2018.
- On D3D v18.12, 95% works in PLA for tight fit, and 90% works to stick peg all the way in. Recommended: maybe 92%
- Peg was generated by a Boolean subtract in last version prior to 8/23/18. That is less editable, so I made the hole a straight through pocket on the small side - using the standard workflow of creating and extruding sketches on flat sides. An example of design-for-manufacturing mindset - where features are holes and straight through - as opposed to more advanced Boolean subtractions which outside of 3D printing cannot be made easily. - MJ
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 05:06, 3 November 2019 | (3 KB) | Marcin (talk | contribs) | |
| 03:35, 3 November 2019 | (3 KB) | Marcin (talk | contribs) | 1 mm wider peg for new carriage with widened peg hole | |
| 20:51, 23 August 2018 | (2 KB) | Marcin (talk | contribs) | Peg srengthened with thicker walls, see FreeCAD file description. | |
| 17:09, 13 April 2017 | (2 KB) | Marcin (talk | contribs) |
You cannot overwrite this file.
File usage
The following 8 pages use this file: