Talk:CEB Press/Manufacturing Instructions
Nice icons on the bottom:) Excellent. -MJ
These links were put here for archival purposes. If you feel a need to use them, take only the good information from the pages and put them here. Thanks! Ryan Lutz 02:31, 26 July 2011 (CEST)
This page will hold the final version of the Build Instructions after the wiki reorganization. This is a list of pages that might hold relevant info. These need to be consolidated here: --Conor 10:00, 20 February 2011 (PST)
- CEB Fabrication
- CEB Automation Prototype II
- Arduino Control of CEB Prototype 2
- FeF Liberator Fabrication
- Grate Shaker
- CEB Press 2
- CEB Automation Prototype II
- The Liberator Assembly
- The Liberator Full Release - Mechanical Fabrication
- dxf files
- [1]
- The_Liberator_Beta_v1.0_Specifications
- Bill_of_materials_for_The_Liberator_II
- pdfs
- Calculated_Bill_of_Materials_for_The_Liberator_Beta_v1.0
- The_Liberator_Master_Bill_of_Materials
- http://vimeo.com/22102016
From this page you will find information on how to build the different models of Compressed Earth Brick (CEB) press machines that the Open Source Ecology group have designed.
Manufacturing Instructions Development Log
I started work on a word processing version of the CEB Press User's Manual on the 18 September 2011 (a few hours over one day ago). I am using OpenOffice 3.3. I intend this version to be print-friendly, and to publish the final draft in .PDF format.
As anticipated, I am encountering some hurdles to completing it, but I am steaming past them as best I can. I am trying to be as prolific as I can in commenting the .ODT source document, and describing the various hurdles (sometimes conundrums on whether to do X or Y, or explaining why I chose to do X over Y, etc.) on the GVCS Technical Development/Documentation and Instructionals subforum.
I am doing this remotely and blindly. I do not know if someone is already working on this at Factor e Farm ... but given there's no mention here and no reply to a thread Marcin made dated seven months prior to my writing this comment asking for someone to put together the build manual, I took it upon myself to throw caution to the wind and try to draft something together. If for some reason it proves a complete failure, at least it would be a model for what not to do! :P --Howard V. Agnew 09:32, 20 September 2011 (CEST)