Tibor Log
Check Monica Log and Jean-Baptiste_Log.
Wen Aug 07, 2013
The first LifeTrac idea: trying simplify PowerCube Frame: File:PowerCubeFrame.skp
- reduction 20% of tubing
- using 3-4-5 right angle triangle
- can be extend to stronger xyz frame (but then it has +20% tubing)
What do you thing?
Sat Aug 03, 2013
On Design Sprint i participate on adding modules to dozuki machines pages. Converting Phoenix Assembly Method page from odt to wiki.
Sat Jul 20, 2013
In last few days i have working on Main Machine Page Template Demo. Look at my page How it works:
- load existing wiki source from machine page
- fill form with parts from that page
- after editing and submiting the form you can copy and paste updated source to machine page.
It's just demo, so everything (every machine change) is made only on that Tibor Test Page. I don't have much time to do it, so it's don't looks how it could. I also can't imagine how can the template fill all requirements defined on Main Machine Page Template and existing machine multipage (CNC Torch Table, etc.)
I will try to be online on OSE Design Sprint today.
Sat Jul 13, 2013
Fri July 12, 2013
Nobody answers my questions, so i don't know if i have right dimensions. This is reason why i have files on my own place, not here:
Tue July 8, 2013
Working on new Warehouse, instructions on Warehouse Development Brief
- I'm not sure about inner/outer radius on 1/4 or 1/2 thick square tube profile. Can someone in workshop measure it? I will continue on this tomorow.
- Any suggestion to filenaming? I use schema Warehouse-<name>-<modificator>, example: Warehouse-SquareTube-Thin
Wen Jun 26, 2013
Created Sketchup model of 3 Inch Wheel Hub: File:3-inchHub1.skp, File:3-inchHub2.skp
- I don't know if the dimensions in the 1st file are ok, I'm not familiar with LibreCAD yet.
- Can be lower collar on 2nd file welded directly to the 24" round wheel plate, or i must add another round plate, with 4 holes to bolt it there?
Created some new plates for cylinder mounting: File:New-plates-suggestion.skp
- They would be used instead of rectangular 8x8 or 8x12 plates.
- On red axis are variations of the same plate, with different fabrication process.
- Do you find it usefull?
Sun Jun 23, 2013
Start QC of Backhoe Legs and Feet. Found technical problem with last version of File:Backhoe stabilizerarms1.skp:
- there is not enough place for moving legs up, they would be wider that LifeTrac in max upper position.
- do we need this module? Aditional stability can be achieved with laying down the LifeTrac arm. It is not enough?
Sat Jun 22, 2013
Tibor's work sample - [1]. Got him do to Quality Control
Quick info
Name: Tibor Soviš
Country: Slovakia
Timezone: GMT+0200 (CST+7)