D3D Universal Software
Jump to navigation
Jump to search
Software
- Printer - Marlin, Lulzbot Cura, OSE Linux, FeF Microfactory printer profiles
Plotter File Generation
- Plotter - Using Inkscape to Generate Gcode
Code
Firmware
- Marlin - File:Marlin Universal.zip
- Cura Settings File:D3duniversal 8.ini
Sample First Print File
- File:5high cube.zip (contains gcode file)
- size: 1x1x5 cm (5 cm high, square base of 1 cm each side, hollow and open at the top)
- for 1mm nozzle (see D3D_Universal_Build_Manual#First_Run_Procedure_and_Quality_Control)
- needs to be unziped and load unto SD card
- visualize with a gcode viewer, eg [1]
- ambitious for a first print!
- add your result here [2]