File:Peg 8mm rods.fcstd
Peg_8mm_rods.fcstd (file size: 20 KB, MIME type: application/zip)
Warning: This file type may contain malicious code.
By executing it, your system may be compromised.
Notes
- 22:28, 2 November 2019 version fixes the collapsing peg issue, and works with the 1 mm wider belt peg hole.
- The Original file by Michel Dhoore, scaled down to 85%
- Print as is - this is scaled to the optimal size
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 03:28, 3 November 2019 | (20 KB) | Marcin (talk | contribs) | 1 mm wider peg |
| 20:50, 23 August 2018 | (13 KB) | Marcin (talk | contribs) | Hole through center was made straight, not tapered with the outer shape - to give it more strength. The web was also thickened for more strength. This addresses the pegs collapsing when pushed in too hard. | |
| 17:12, 13 April 2017 | (14 KB) | Marcin (talk | contribs) | Original file by Michel Dhoore. |
- You cannot overwrite this file.
File usage
The following 8 pages link to this file:
