Latest revision as of 00:27, 5 October 2019

Mar 23, 2017

April 17 is a reversion to the first file, which has the correct 13 mm magnet holes-MJ
March 23 version - small holes no longer fit magnets. Need to expand - .3mm?

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	00:27, 5 October 2019	(93 KB)	Marcin (talk \| contribs)	Poked a hole in the back for easy belt winding.
	03:28, 13 June 2017	(5 KB)	Marcin (talk \| contribs)	In correct x axis assembly location.
	01:56, 13 June 2017	(5 KB)	Marcin (talk \| contribs)	Short idler simplified, no sketch.
	01:56, 13 June 2017	(9 KB)	Marcin (talk \| contribs)	Short idler piece simplified, with sketch.
	01:33, 13 June 2017	(130 KB)	Marcin (talk \| contribs)	Short idler side with Dimensioning Drawing
	01:20, 29 April 2017	(75 KB)	Polemidis (talk \| contribs)	moved the nutcatchers 1.5mm more deeper
	04:20, 20 April 2017	(75 KB)	Polemidis (talk \| contribs)	Moved Nutcachers 1mm deeper Removed the idler from the file
	05:33, 17 April 2017	(117 KB)	Marcin (talk \| contribs)
	03:41, 23 March 2017	(117 KB)	Polemidis (talk \| contribs)	smaller magnet hole diameter moved a little the outer holes away from the edge
	04:17, 21 March 2017	(117 KB)	Polemidis (talk \| contribs)

You cannot overwrite this file.

The following 9 pages use this file:

@@ Line 1: / Line 1: @@
 =Mar 23, 2017=
-*April 13 is a reversion to the first file. -MJ
+*April 17 is a reversion to the first file, which has the correct 13 mm magnet holes-MJ
 *March 23 version - small holes no longer fit magnets. Need to expand - .3mm?