CNC Machine Construction Set

Introduction

What are all the heads that can be put on the Universal Axis - in its 8 mm to 3 inch rod versions? There is a wide range, and the special considerations for each are shown here.

=Development]]

Development Template

	Description	Link to Work Product	%
	DESIGN
1	Requirements + Value Proposition	[[{{{0}}} Requirements + Value Proposition]]	Open Source CNC Machine Construction Set
2	Industry_Standards	[[{{{0}}} Industry Standards]]	{{{2}}}
3	Conceptual Design	[[{{{0}}} Conceptual Design]]	{{{3}}}
4	Module Breakdown	[[{{{0}}} Module Breakdown]]	{{{4}}}
5	3D CAD	[[{{{0}}} 3D CAD]]	{{{5}}}
6	Calculations	[[{{{0}}} Calculations]]	{{{6}}}
7	Electronics Design	[[{{{0}}} Electronics Design]]	{{{7}}}
8	Wiring and Plumbing	[[{{{0}}} Wiring and Plumbing]]	{{{8}}}
9	Software	[[{{{0}}} Software]]	{{{9}}}
	BILL OF MATERIALS
10	BOM	[[{{{0}}} BOM]]	{{{10}}}
11	vBOM	[[{{{0}}} vBOM]]	{{{11}}}
12	CAM Files	[[{{{0}}} CAM Files]]	{{{12}}}
13	Cut List	[[{{{0}}} Cut List]]	{{{13}}}
	BUILD
14	Build Instructions	[[{{{0}}} Build Instructions]]	{{{14}}}
15	Fabrication Drawings	[[{{{0}}} Fabrication Drawings]]	{{{15}}}
16	Exploded Part Diagram	[[{{{0}}} Exploded Part Diagram]]	{{{16}}}
17	Production Engineering	[[{{{0}}} Production Engineering]]	{{{17}}}
	DATA COLLECTION
18	Build Pictures and Video	[[{{{0}}} Build Pictures and Video]]	{{{18}}}
19	Data Collection	[[{{{0}}} Data Collection]]	{{{19}}}
20	Future Work	[[{{{0}}} Future Work]]	{{{20}}}

Links

• 1" Universal Axis
• 2" Universal Axis
• 3" Universal Axis