D3D PVC pipe 8in bed

Hint: This is being developed as a lightweight frame version of the D3D 3D Printer which allows for taking the workshop easily to remote locations - as otherwise each frame weigh 20 lb for 1/8" frame with 1.5" steel width. Further, we have the PVC pipe frame already in the D3D Workbench.

Development Template

edit

Titan Aero + Fan

• E3D Titan Aero Extruder

edit

Part Library

See https://github.com/OpenSourceEcology/3D-Printer-Part-Library. All files larger than 1 MB are stored on Github.

Large Files

• Volcano Heater Block - [1]
• Titan Aero - see source file from Lulzbot. See mirrored (to the correct orientation) at OSE Github - 1.5 MB - [2]
• Volcano heater block. 1.6MB at Github - [3]. And File:Volcanoheater.fcstd.

Small Files

• Fan - full fan - File:5015blower.fcstd
• 8 mm distance sensor - File:8mmsensor.fcstd
• Stepper Motor Holder - File:Motor interface.fcstd.

• Bottom part - File:Motorholder bottom.fcstd
• Bottom part - File:Motorholder top.fcstd

• Sensor Holder - File:8mmsensor holder.fcstd
• Blower Holder - File:Blowerholder.fcstd
• Nema 17 Stepper Motor - File:Nema17stepper.fcstd
• Right Duct - File:Rightduct.stl - [4]
• Just holder part of 8 mm sensing sensor - File:Sensorholderonly.fcstd. File:Sensorholderonly.stl.

Hole Jig

edit

2017 Build Example 1 - by Elie from Montreal at Factor e Farm

https://docs.google.com/presentation/d/1eb3Z35rJdZ7DCF0JXA2dWnQV-9Him5bEF2uV4JeSYOo/edit#slide=id.p

Links

• D3D Extruder