CEB instructionals CAD Requests: Difference between revisions
Jump to navigation
Jump to search
| Line 9: | Line 9: | ||
**We need the CAD of the drawings already there. See the page. | **We need the CAD of the drawings already there. See the page. | ||
*[[CEB Press/Manufacturing Instructions/Arms - secondary|Arms - secondary]]-Show where to weld the leg holders. | *[[CEB Press/Manufacturing Instructions/Arms - secondary|Arms - secondary]]-Show where to weld the leg holders. | ||
*[[CEB Press/Manufacturing Instructions/Hopper sheet metal|Hopper sheet metal]] | *[[CEB Press/Manufacturing Instructions/Hopper sheet metal|Hopper sheet metal]] | ||
**How to cut for both 5x10 or 4x8 sheets | **How to cut for both 5x10 or 4x8 sheets | ||
| Line 46: | Line 44: | ||
**Where to weld leg holders | **Where to weld leg holders | ||
*[[CEB Press/Manufacturing Instructions/Hoses - Secondary cylinder hose unit|Hoses - Secondary cylinder hose unit]]-exploded parts diagrams | *[[CEB Press/Manufacturing Instructions/Hoses - Secondary cylinder hose unit|Hoses - Secondary cylinder hose unit]]-exploded parts diagrams | ||
=Sketchup Models from CAD model= | =Sketchup Models from CAD model= | ||
Revision as of 23:26, 13 December 2011
Please place a check (
) if you have placed the fab drawing on a page. You can either place a drawing on the page or email me the drawings at brianna (at) kufadesigns (dot) com and I can put them up.
Fab drawings
- Brick Holder Plate
- Controller Mount
- Dirt-keeper plate
- Valve Mount
- Arms - primary
- We need the CAD of the drawings already there. See the page.
- Arms - secondary-Show where to weld the leg holders.
- Hopper sheet metal
- How to cut for both 5x10 or 4x8 sheets
- Hinge Plates assembly
- Exploded parts diagram of how to assemble hopper plates with hinge plates
- Hopper mounting plate-Show where to punch holes before welding, and how to weld
- Soil grate-can see page for examples of what's needed.
- Need for both "new" and "old" versions
- Show where to torch holes in angle.
- how to weld frame together
- placement of rebars/flats and cross flat
- Soil Shaker motor unit- Exploded parts diagram on hydraulics
- Soil Shaker
- Holes on bottom angle
- Holes on top angle
- Hammer detail
- Exploded parts of assembly (or something like assembly diagram on page)
- Soil loading drawer-3D ones similar to those on page, showing how it's assembled.
- Roller guides-Need diagrams like those on page.
- Main Cylinder Preparation
- Upper Press foot hole diagram
- Lower Press foot hole diagram
- Expanded parts diagram with captions of hydraulic couplers
- Main Frame Preparation
- Hole locations horizontal, and drawer members.
- Drawer adjustment nuts location
- Hole locations vertical members
- Wide Cylinder supports**Thin Cylinder Supports
- Sensor holders
- Magnet Holder
- Frame with main cylinder
- Roller Guide placement expanded (see page, theres one there similar to what we want)
- Overhead view showing placement of all U-channel and wide cylinder supports
- View showing thin cylinder supports and sensor holder and magnet holder.
- Where to weld leg holders
- Hoses - Secondary cylinder hose unit-exploded parts diagrams
Sketchup Models from CAD model
- Brick Holder Plate
- Controller Mount
- Dirt-keeper plate
- Valve Mount
- Arms - primary
- Arms - secondary
- Grate mounts
- Hopper supports
- Hopper sheet metal
- Hopper mounting plate
- Soil grate
- Soil Shaker motor unit
- Soil Shaker
- Soil loading drawer-
- Roller guides
- Main Cylinder Preparation
- Main Frame Preparation
- Magnet Holder
- Sensor Holders
- Wide Cylinder Supports
- Thin Cylinder Supports
- Drawer Members
- Vertical Member
- Horizontal Members
- Frame with main cylinder
- Hoses - Secondary cylinder hose unit