CEB instructionals CAD Requests: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
Line 10: Line 10:
*[[CEB Press/Manufacturing Instructions/Hopper sheet metal|Hopper sheet metal]]-Hopper Sheet Metal: (100060-1, 100061-1, 100062-1, 100062-2)
*[[CEB Press/Manufacturing Instructions/Hopper sheet metal|Hopper sheet metal]]-Hopper Sheet Metal: (100060-1, 100061-1, 100062-1, 100062-2)
**How to cut for both 5x10 or 4x8 sheets
**How to cut for both 5x10 or 4x8 sheets
**Exploded parts diagram of how to assemble hopper plates with hinge plates (
**Exploded parts diagram of how to assemble hopper sheet metal with hinge plates (100064 series, 100065 series) and all bolts and nuts
*[[CEB Press/Manufacturing Instructions/Hopper mounting plate|Hopper mounting plate]]-Show where to punch holes before welding, and how to weld
*[[CEB Press/Manufacturing Instructions/Hopper mounting plate|Hopper mounting plate]]-Show where to punch holes before welding, and how to weld
*[[CEB Press/Manufacturing Instructions/Soil grate|Soil grate]]-can see page for examples of what's needed.
*[[CEB Press/Manufacturing Instructions/Soil grate|Soil grate]]-100070-1 can see page for examples of what's needed.
**Need for both "new" and "old" versions
**Need for both "new" and "old" versions
**Show where to torch holes in angle.
**Show where to torch holes in angle.- 100068-4, 10086-3
**how to weld frame together
**how to weld frame together- 100068-4, 10086-3, 100069-1, 10069-5
**placement of rebars/flats and cross flat
**placement of rebars/flats and cross flat
*[[CEB Press/Manufacturing Instructions/Soil Shaker motor unit|Soil Shaker motor unit]]- Exploded parts diagram on hydraulics
*[[CEB Press/Manufacturing Instructions/Soil Shaker motor unit|Soil Shaker motor unit]]- Exploded parts diagram on hydraulics
*[[CEB Press/Manufacturing Instructions/Soil Shaker|Soil Shaker]]
*[[CEB Press/Manufacturing Instructions/Soil Shaker|Soil Shaker]]
**Holes on bottom angle
**Holes on bottom angle- 100042
**Holes on top angle
**Holes on top angle-100043
**Hammer detail
**Guard plate cut-away detail- 100074
**Hammer detail 100044,100045
**Exploded parts of assembly (or something like assembly diagram on page)
**Exploded parts of assembly (or something like assembly diagram on page)
*[[CEB Press/Manufacturing Instructions/Soil loading drawer|Soil loading drawer]]-3D ones similar to those on page, showing how it's assembled.  
*[[CEB Press/Manufacturing Instructions/Soil loading drawer|Soil loading drawer]]-100026- 3D ones similar to those on page, showing how it's assembled., also a 2D view from above or below showing distances and placings.  
*[[CEB Press/Manufacturing Instructions/Roller guides|Roller guides]]-Expanded parts like on page, top view.
*[[CEB Press/Manufacturing Instructions/Roller guides|Roller guides]]- Expanded parts like on page (theres no group on CAD for entire roller guide assembly), 2D showing holes (100021)
*[[CEB Press/Manufacturing Instructions/Main Cylinder Preparation| Main Cylinder Preparation]]
*[[CEB Press/Manufacturing Instructions/Main Cylinder Preparation| Main Cylinder Preparation]]
**Upper Press foot hole diagram
**Upper Press foot hole diagram-100036
**Lower Press foot hole diagram
**Lower Press foot hole diagram- 100035
**Side view of prepared main cylinder-100038, 100039, those nuts there...
**Expanded parts diagram with captions of hydraulic couplers
**Expanded parts diagram with captions of hydraulic couplers
*[[CEB Press/Manufacturing Instructions/Main Frame Preparation|Main Frame Preparation]]
*[[CEB Press/Manufacturing Instructions/Main Frame Preparation|Main Frame Preparation]]
**Hole locations horizontal, and drawer members.
**Hole locations horizontal(100014) , and drawer members (100011).
**Drawer adjustment nuts location
**Drawer adjustment nuts location (top side of 100011)
**Hole locations vertical members
**Hole locations vertical members 100115, 100015 Please label with what goes in there (sensor
**Wide Cylinder supports
**Wide Cylinder supports 100108,100100
*[[CEB Press/Manufacturing Instructions/Frame with main cylinder|Frame with main cylinder]]
*[[CEB Press/Manufacturing Instructions/Frame with main cylinder|Frame with main cylinder]]
**Roller Guide placement expanded (see page, theres one there similar to what we want)
**Roller Guide placement expanded (see page, theres one there similar to what we want)
**Side view showing placement of all U-channel and wide cylinder supports
**Side view showing placement of all U-channel and wide cylinder supports (100011,100014,100115,100015,100041, 100108,100100) and where to weld leg holders to them (100007)
**View showing thin cylinder supports and sensor holder and magnet holder.
**Where to weld leg holders
*[[CEB Press/Manufacturing Instructions/Hoses - Secondary cylinder hose unit|Hoses - Secondary cylinder hose unit]]-exploded parts diagrams
*[[CEB Press/Manufacturing Instructions/Hoses - Secondary cylinder hose unit|Hoses - Secondary cylinder hose unit]]-exploded parts diagrams


Revision as of 02:38, 14 December 2011

Please place a check (Check.png) if you have placed the fab drawing on a page. You can either place a drawing on the page or email me the drawings at brianna (at) kufadesigns (dot) com and I can put them up.

Fab drawings

  • Brick Holder Plate-100079-1
  • Controller Mount-100084-1
  • Dirt-keeper plate-100080-1
  • Valve Mount-100051-1
  • Arms - primary-100009-1,100010-1
    • We need the CAD of the drawings already there. See the page.
  • Hopper sheet metal-Hopper Sheet Metal: (100060-1, 100061-1, 100062-1, 100062-2)
    • How to cut for both 5x10 or 4x8 sheets
    • Exploded parts diagram of how to assemble hopper sheet metal with hinge plates (100064 series, 100065 series) and all bolts and nuts
  • Hopper mounting plate-Show where to punch holes before welding, and how to weld
  • Soil grate-100070-1 can see page for examples of what's needed.
    • Need for both "new" and "old" versions
    • Show where to torch holes in angle.- 100068-4, 10086-3
    • how to weld frame together- 100068-4, 10086-3, 100069-1, 10069-5
    • placement of rebars/flats and cross flat
  • Soil Shaker motor unit- Exploded parts diagram on hydraulics
  • Soil Shaker
    • Holes on bottom angle- 100042
    • Holes on top angle-100043
    • Guard plate cut-away detail- 100074
    • Hammer detail 100044,100045
    • Exploded parts of assembly (or something like assembly diagram on page)
  • Soil loading drawer-100026- 3D ones similar to those on page, showing how it's assembled., also a 2D view from above or below showing distances and placings.
  • Roller guides- Expanded parts like on page (theres no group on CAD for entire roller guide assembly), 2D showing holes (100021)
  • Main Cylinder Preparation
    • Upper Press foot hole diagram-100036
    • Lower Press foot hole diagram- 100035
    • Side view of prepared main cylinder-100038, 100039, those nuts there...
    • Expanded parts diagram with captions of hydraulic couplers
  • Main Frame Preparation
    • Hole locations horizontal(100014) , and drawer members (100011).
    • Drawer adjustment nuts location (top side of 100011)
    • Hole locations vertical members 100115, 100015 Please label with what goes in there (sensor
    • Wide Cylinder supports 100108,100100
  • Frame with main cylinder
    • Roller Guide placement expanded (see page, theres one there similar to what we want)
    • Side view showing placement of all U-channel and wide cylinder supports (100011,100014,100115,100015,100041, 100108,100100) and where to weld leg holders to them (100007)
  • Hoses - Secondary cylinder hose unit-exploded parts diagrams

Sketchup Models from CAD model

Retrieved from "https://wiki.opensourceecology.org/index.php?title=CEB_instructionals_CAD_Requests&oldid=47989"