D3D Integration: Difference between revisions
Jump to navigation
Jump to search
(Added another item) |
(Minor Clarification) |
||
| Line 16: | Line 16: | ||
*Z axis | *Z axis | ||
*[[D3D Heated Bed]] | *[[D3D Heated Bed]] | ||
*[[Heated Chamber]] ( | *[[Heated (Print/Build) Chamber]] or [[Heated (Print/Build) Enclosure]] The link name needs to be chosedn if we decide to make this a thing. The heating could be active or passive. The device is used for things like ABS Plastic | ||
*[[D3D Cable Chain]] | *[[D3D Cable Chain]] | ||
*[[D3D Wiring]] | *[[D3D Wiring]] | ||
Revision as of 15:51, 4 February 2019
Hint: Click on hyperlinks in picture below to download FreeCAD files.
Modules
- D3D Integration
- D3D Integration for 12 inch Frame version[1]
Hardware
- D3D Extruder
- D3D Extruder Holder
- D3D Frame
- D3D End Stops
- D3D Universal Axis
- Z axis
- D3D Heated Bed
- Heated (Print/Build) Chamber or Heated (Print/Build) Enclosure The link name needs to be chosedn if we decide to make this a thing. The heating could be active or passive. The device is used for things like ABS Plastic
- D3D Cable Chain
- D3D Wiring
Controls
- D3D Controller
- D3D Marlin
- Software - Download Pronterface
- Bed Leveling
- Calibration
- Wiring - we can use prior work on RAMPS from the XM_Prusa_i3_Procedure from the March 2016 workshop. Slide 42 in this presentation -
Links
See development page at D3D