CEB Press Build Instructions

This page will hold the final version of the Build Instructions after the wiki reorganization. This is a list of pages that might hold relevant info. These need to be consolidated here: --Conor 10:00, 20 February 2011 (PST)

• CEB Fabrication
• CEB Automation Prototype II
• Arduino Control of CEB Prototype 2
• FeF Liberator Fabrication
• Grate Shaker
• CEB Press 2
• CEB Automation Prototype II
• The Liberator Assembly
• The Liberator Full Release - Mechanical Fabrication
• dxf files
• [1]
• The_Liberator_Beta_v1.0_Specifications
• Bill_of_materials_for_The_Liberator_II
• pdfs
• Calculated_Bill_of_Materials_for_The_Liberator_Beta_v1.0
• The_Liberator_Master_Bill_of_Materials

---

From this page you will find information on how to build the different models of Compressed Earth Brick (CEB) press machines that the Open Source Ecology group have designed.

Part Fabrication Guides

1. Arms - primary
2. Arms - secondary
3. Controller box and cord
4. Feet
5. Frame with main cylinder
6. Grate mounts
7. Hopper sheet metal
8. Hopper mounting plate
9. Hopper supports
10. Hoses - Secondary cylinder hose unit
11. Hoses - Shaker and main cylinder
12. Hoses - Main hose unit
13. Legs
14. Roller guides
15. Secondary cylinder
16. Secondary cylinder sensor unit
17. Sensor - Main cylinder
18. Sensor - Secondary cylinder
19. Sensor - Soil
20. Soil grate
21. Soil loading drawer
22. Soil Shaker motor unit
23. Soil Shaker
24. Solenoid valve

Final Assembly and Job Site Setup

CEB Press Testing and Troubleshooting

Firmware

• CEB Control Source Code v1.01 Annotated
• CEB Control Source Code v1.01
• CEB Control Source Code v1.0

• Control Code Site