CEB instructionals CAD Requests

Please place a check () if you have placed the fab drawing on a page. You can either place a drawing on the page or email me the drawings at brianna (at) kufadesigns (dot) com and I can put them up.

Fab drawings

• Brick Holder Plate-100079-1
• Controller Mount-100084-1
• Dirt-keeper plate-100080-1
• Valve Mount-100051-1
• Arms - primary-100009-1,100010-1
  • We need the CAD of the drawings already there. See the page.
• Hopper sheet metal-Hopper Sheet Metal: (100060-1, 100061-1, 100062-1, 100062-2)
  • How to cut for both 5x10 or 4x8 sheets
  • Exploded parts diagram of how to assemble hopper sheet metal with hinge plates (100064 series, 100065 series) and all bolts and nuts
• Hopper mounting plate-Show where to punch holes before welding, and how to weld
• Soil grate-100070-1 can see page for examples of what's needed.
  • Need for both "new" and "old" versions
  • Show where to torch holes in angle.- 100068-4, 10086-3
  • how to weld frame together- 100068-4, 10086-3, 100069-1, 10069-5
  • placement of rebars/flats and cross flat
• Soil Shaker motor unit- Exploded parts diagram on hydraulics
• Soil Shaker
  • Holes on bottom angle- 100042
  • Holes on top angle-100043
  • Guard plate cut-away detail- 100074
  • Hammer detail 100044,100045
  • Exploded parts of assembly (or something like assembly diagram on page)
• Soil loading drawer-100026- (in progress (ROB B 12-13-11)) 3D ones similar to those on page, showing how it's assembled., also a 2D view from above or below showing distances and placings.
• Roller guides- Expanded parts like on page (theres no group on CAD for entire roller guide assembly), 2D showing holes (100021)
• Main Cylinder Preparation
  • Upper Press foot hole diagram-100036
  • Lower Press foot hole diagram- 100035
  • Side view of prepared main cylinder-100038, 100039, those nuts there...
  • Expanded parts diagram with captions of hydraulic couplers
• Main Frame Preparation
  • Hole locations horizontal(100014) , and drawer members (100011).
  • Drawer adjustment nuts location (top side of 100011)
  • Hole locations vertical members 100115, 100015 Please label with what goes in there (sensor
  • Wide Cylinder supports 100108,100100
• Frame with main cylinder
  • Roller Guide placement expanded (see page, theres one there similar to what we want)
  • Side view showing placement of all U-channel and wide cylinder supports (100011,100014,100115,100015,100041, 100108,100100) and where to weld leg holders to them (100007)
• Hoses - Secondary cylinder hose unit-exploded parts diagrams

Updated Sketchup Models from CAD model

• Brick Holder Plate
• Controller Mount
• Dirt-keeper plate
• Valve Mount
• Arms - primary
• Arms - secondary
• Grate mounts
• Hopper supports
• Hopper sheet metal
• Hopper mounting plate
• Soil grate
• Soil Shaker motor unit
• Soil Shaker
• Soil loading drawer-
• Roller guides
• Main Cylinder Preparation
• Main Frame Preparation
  • Magnet Holder
  • Sensor Holders
  • Wide Cylinder Supports
  • Thin Cylinder Supports
  • Drawer Members
  • Vertical Member
  • Horizontal Members
• Frame with main cylinder
• Hoses - Secondary cylinder hose unit