File:Universal axis motor side.fcstd
Jump to navigation
Jump to search
Universal_axis_motor_side.fcstd (file size: 36 KB, MIME type: application/zip)
Warning: This file type may contain malicious code. By executing it, your system may be compromised.
Notes
- 13 June, 2017 - first file has sketch, second doesn't. The file shows the clamshell with nutcatchers
- 6 April, 2017 - added 2 more magnet holes.
- 5 April, 2017 version by Polemidis is the correct one to download. There may be a bug here - the April 5, 2017 version by Marcin should be the same as the former version because it is a copy of the former - but only the former version is correct and the later version is not correct. The correct version should have motor mount holes be 4 mm to give space for 3 mm bolts to slide right in.
- March 18, 2017 version reduced the depth of the holes to 4mm - so that m3x25 screws can be used without washers to mount the motor
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 08:29, 5 December 2019 | (36 KB) | Marcin (talk | contribs) | Dumb object of last upload. |
| 04:33, 13 October 2019 | (257 KB) | Marcin (talk | contribs) | Ripped out belt winding through-hole on the back side. | |
| 17:48, 4 October 2019 | (9 KB) | Marcin (talk | contribs) | Simplified by getting rid of additional solids |
You cannot overwrite this file.