File:Universal Axis Idler Side short version.fcstd
Jump to navigation
Jump to search
Universal_Axis_Idler_Side_short_version.fcstd (file size: 93 KB, MIME type: application/zip)
Warning: This file type may contain malicious code. By executing it, your system may be compromised.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 00:27, 5 October 2019 | (93 KB) | Marcin (talk | contribs) | Poked a hole in the back for easy belt winding. |
| 03:28, 13 June 2017 | (5 KB) | Marcin (talk | contribs) | In correct x axis assembly location. | |
| 01:56, 13 June 2017 | (5 KB) | Marcin (talk | contribs) | Short idler simplified, no sketch. | |
| 01:56, 13 June 2017 | (9 KB) | Marcin (talk | contribs) | Short idler piece simplified, with sketch. | |
| 01:33, 13 June 2017 | (130 KB) | Marcin (talk | contribs) | Short idler side with Dimensioning Drawing | |
| 01:20, 29 April 2017 | (75 KB) | Polemidis (talk | contribs) | moved the nutcatchers 1.5mm more deeper | |
| 04:20, 20 April 2017 | (75 KB) | Polemidis (talk | contribs) | Moved Nutcachers 1mm deeper Removed the idler from the file | |
| 05:33, 17 April 2017 | (117 KB) | Marcin (talk | contribs) | ||
| 03:41, 23 March 2017 | (117 KB) | Polemidis (talk | contribs) | smaller magnet hole diameter moved a little the outer holes away from the edge | |
| 04:17, 21 March 2017 | (117 KB) | Polemidis (talk | contribs) |
You cannot overwrite this file.
File usage
The following 9 pages use this file: