Controlpanel_v1904.fcstd ‎(file size: 133 KB, MIME type: application/zip)

Warning: This file type may contain malicious code. By executing it, your system may be compromised.

Notes

Final version without bend is 13:17, 3 May 2019
11:37, 3 May 2019 is the final panel including components, but without the panel refinements for printing optimization (overhangs removal)
5/3/2019 13:00 version is fine for printing on one print bed. Next versions are for vertical print and bend.
5/3/2019 version compound without holes did not work - deletef it - if there are the twinkles in the object, it may be a shell only in STL form. Cura result was broken. Went back to the plain file, rebuilt side rails. I could not get the twinkle out while retaining full build.
Start with Control panel with everything in a pile.

File history

Click on a date/time to view the file as it appeared at that time.

Date/Time	Dimensions	User	Comment
22:32, 2 May 2019	(739 KB)	Marcin (talk \| contribs)	Reverted to version as of 21:48, 2 May 2019 (UTC)
21:48, 2 May 2019	(739 KB)	Marcin (talk \| contribs)	Finished both side mounts.
21:45, 2 May 2019	(599 KB)	Marcin (talk \| contribs)	Bottom mount complete. And left mount complete.
21:28, 2 May 2019	(544 KB)	Marcin (talk \| contribs)	Started on bottom support
21:14, 2 May 2019	(502 KB)	Marcin (talk \| contribs)	Added rail for the wire box.
20:56, 2 May 2019	(473 KB)	Marcin (talk \| contribs)	Starting on wire box.
20:21, 2 May 2019	(472 KB)	Marcin (talk \| contribs)	Added depth + wire lock.
19:26, 2 May 2019	(447 KB)	Marcin (talk \| contribs)	Panel proper added.
14:45, 2 May 2019	(443 KB)	Marcin (talk \| contribs)	Including 12" frame for reference.
23:27, 1 May 2019	(237 KB)	Marcin (talk \| contribs)	Control panel with everything in a pile.

You cannot overwrite this file.

The following 9 pages use this file: