Backhoe 3/Research Development
Jump to navigation
Jump to search
Backhoe 3 | ||
---|---|---|
Home | Research & Development | Bill of Materials | Manufacturing Instructions | User's Manual | User Reviews | ![]() |
Status
In 2012, OSE started the Backhoe 2 (Deep Dig) redesign. The new backhoe will have an increased range of motion and use the Bobcat quick attach standard to attach to the LifeTrac 6.
For Oct 2013 work:
- Dan Log, Cody Log, Marcin Log, and James Log.
- Development Board
- The main open issue is redesigning the main pivot so that we have somewhere to mount the hydraulics to get as close to 180 degrees of side to side movement.
- Another known task is adding bushings to all 1" pivots since they have too much slack.
For the 2012 work (most of which is still being used):
- Lenny-Wayne as as Guest Collaborative Production Director was working on the GrabCAD Backhoe Redesign for Fabrication with Aaron as project manager.
- Brian Log.
- Backhoe Log.
- GrabCAD Backhoe Redesign for Fabrication.
Designs
- OSE Oct 2013 redesign is using File:Backhoe deep dig.skp.
- OSE Side by side hydraulic design based on small ditch witch design. File:Backhoe sidebyside2.skp
- Oily Hands has a huge list of diggers people have built themselves
- this guy has a fully documented build process for his
- Ubuildit Plans has a backhoe design that's about as simple as one can possibly get.
- Pivot rotation using scissor motion and 14" cylinder File:Backhoe sidebyside8.skp.
- Other versions of the Backhoe.