OSE Part Library: Difference between revisions
| Line 24: | Line 24: | ||
sprocketassy.jpg|'''[[Drive Sprocket Assembly Library]]'''. Sprocket used to drive bulldozer 2015 tracks. Clamps around 3" shaft for complete interchangeability. | sprocketassy.jpg|'''[[Drive Sprocket Assembly Library]]'''. Sprocket used to drive bulldozer 2015 tracks. Clamps around 3" shaft for complete interchangeability. | ||
45cuinmotor.jpg|'''[[File:45cuinmotor.fcstd]]. 45.6 cubic inch motor standard for LifeTrac and MicroTrac. | 45cuinmotor.jpg|'''[[File:45cuinmotor.fcstd]]. 45.6 cubic inch motor standard for LifeTrac and MicroTrac. | ||
MT_motormountplate.jpg|'''[[File: | MT_motormountplate.jpg|'''[[File:MT_motormountplate.fcstd]]. Mount plate for hydraulic motor and idler. | ||
sprocketcad.jpg|'''[[File:sprocket.fcstd]]. Sprocket used to drive bulldozer 2015 tracks. | sprocketcad.jpg|'''[[File:sprocket.fcstd]]. Sprocket used to drive bulldozer 2015 tracks. | ||
tracksunit.jpg|Tracks used in 2015 microtrac and bulldozer prototypes. [[File:Trackunit.FCStd]] | tracksunit.jpg|Tracks used in 2015 microtrac and bulldozer prototypes. [[File:Trackunit.FCStd]] | ||
Revision as of 01:31, 5 September 2017
The Part Library is OSE's repository of accurate 3D CAD files. These should be posted as individual CAD files for all the parts, modules, and full machines. Only approved OSE Developers have commit privileges to the Part Library. During the design process, the Process Manager handles requests to pull new files into the Part Library.
See LifeTrac Construction Set#Modules for background to this work.
Construction Set Modules
We are listing all the modules here for porting to FreeCAD format. List here is under development, and could use several Ph.D. theses in machine design to complete.
Many of the following are Construction Set Primitive Modules. These modules are parts that go into a tractor, and can be used to build various other related heavy machines.
Filament Maker Library - Lyman Filament Extruder Part Library
Seed Eco-Home Part Library. Seed eco home structures, utilities, plumbing 2017.
Power Cube Library. Stable version of the Structural Power Cube from 2015.
Stock Tubing Library. Hole size is 1-1/8", and 1/4" and 1/2" wall thickness is used.
Stock Bonding Plate Library, 2013.
Universal Rotor Library. Universal Rotor with 3" shaft, built in 2013. See Cory Log.
Drive Sprocket Assembly Library. Sprocket used to drive bulldozer 2015 tracks. Clamps around 3" shaft for complete interchangeability.
File:45cuinmotor.fcstd. 45.6 cubic inch motor standard for LifeTrac and MicroTrac.
File:MT motormountplate.fcstd. Mount plate for hydraulic motor and idler.
File:Sprocket.fcstd. Sprocket used to drive bulldozer 2015 tracks.
Tracks used in 2015 microtrac and bulldozer prototypes. File:Trackunit.FCStd
Pivot Plate Library. See info at Stock Pivot Plate, 1/2" steel.
Idler Mount Plate Library. Idler mount for idlers with 3" shaft, as used in 2015 calfdozer build.
Idler Tensioner Plate Library. Idler tensioner plate for idlers with 3" shaft, as used in 2015 calfdozer build.
Idlers Library. 3" idlers for Bulldozer, rated for 8000 lb bulldozer module weight. Used in 2015 proof of concept.
Idler Clamp Library. Clamp for fixing 3" shaft of idler from lateral motion.
Tracks Library. Chain link for bulldozer tracks.
Drive sprocket for bulldozer, 2015. See Drive Sprocket.
Wheel as part of Modular Wheel Unit, 2012.
Frame module from LifeTrac 2, 2010. This is before perforated tubing entered in 2013. See LifeTrac_II_Build#Frame.
Frame Module, LifeTrac 6, 2013. This is an example of a typical frame that can be built from our stock tubing. See LifeTrac 6 for details
Modular trailer built from perforated tubing and a tractor-trailer axle. Next step is to convert this to a hydraulic dump trailer.
LifeTrac 4. Proper loader arm geometry was used. Modular Wheel Units were used. Last iteration prior to perforated tubing and structural power cubes.
Backhoe prototype 1. It was built as a front attachment for LifeTrac 1, and side to side motion was obtained via articulation of the tractor.
Backhoe prototype 2 on LifeTrac 4.
Universal rotor driving tracks, 2015. See Modular Wheel Units.
Soil pulverizer being used during 2014 build of Faculty House.
Gasifier, built in 2015.
Bulldozer blade built in 2013. See Leandra_Log#June_12.2C_2013.
Side-to-size and rotary pivot, from bulldozer design, see Leandra_Log#June_24.2C_2013
Rotary pivot. Can be used on a buldozer blade or on other implements. See Rotary Pivot
Side-to-side or angle pivot. Can be used on earth-moving blades and other implements, such as universal drawbar. See Angle Pivot
Backhoe side-to-side pivot, built in 2013, see Cory_Log#Pivot
MicroTrac tracks for mounting on rubber wheels, designed in 2013. See Cory Log
Universal Rotor with 3" shaft, built in 2013. See Cory Log.
Ground-hugging pivot, build on LifeTrac 6. See Cory Log.
Backhoe bucket, built in 2013, from Cory Log.
Backhoe boom and stick, built in 2013, see Cory Log#June_25.2C_2013:_Backhoe.
Bobcat Standard Quick Attach fingers, built in 2013.
Micro Power Cube build
More Machines
Other Construction Set Style Machines that were built:
2015 Bulldozer Proof of Concept, prior to build of bulldozer. Stacking 2 Power Cubes, tracks, cab, and arms.
Other Machines, Not Built
Other Construction Set Style Machines, not built:
See Pelletizer Log for files.
Velocar tilting electric microcar, partial prototype built in 2014. See Yann Log.
Part Primitives
These are typically off-shelf parts.
- 2020 aluminum extrusion -[1]
Plumbing Fittings
- PVC - [2]
- 3" PVC elbow - [3]