D3D PVC pipe 8in bed: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
 
(20 intermediate revisions by the same user not shown)
Line 9: Line 9:


<html><iframe width="700" height="370" src="https://osedev.org/graph/weekly/burndown/D3D%20v1804?start=3/11/2018"></iframe></html>
<html><iframe width="700" height="370" src="https://osedev.org/graph/weekly/burndown/D3D%20v1804?start=3/11/2018"></iframe></html>
=Note Extruder Steps Change to 408=
[[D3D_v18.04_Software]]


=Titan Aero + Fan=
=Titan Aero + Fan=
Line 18: Line 21:


=Part Library=
=Part Library=
See https://github.com/OpenSourceEcology/3D-Printer-Part-Library. All files larger than 1 MB are stored on Github.
==Large Files==
*Volcano Heater Block - [https://github.com/OpenSourceEcology/3D-Printer-Part-Library/blob/master/volcano.fcstd]
*[[Titan Aero]] - see source file from Lulzbot. See mirrored (to the correct orientation) at OSE Github - 1.5 MB - [https://github.com/OpenSourceEcology/3D-Printer-Part-Library/blob/master/Titan%20Aero%20Extruder.fcstd]
*Volcano heater block. 1.6MB at Github - [https://github.com/OpenSourceEcology/3D-Printer-Part-Library/blob/master/volcano.fcstd]. And [[File:volcanoheater.fcstd]].
==Small Files==
*Fan - full fan - [[File:5015blower.fcstd]]
*Fan - full fan - [[File:5015blower.fcstd]]
*8 mm distance sensor - [[File:8mmsensor.fcstd]]
*8 mm distance sensor - [[File:8mmsensor.fcstd]]
*Stepper Motor Holder - [[File:Motor_interface.fcstd]]
*Stepper Motor Holder - [[File:Motor_interface.fcstd]].
:*Bottom part - [[File:motorholder_bottom.fcstd]]
:*Bottom part - [[File:motorholder_bottom.fcstd]]
:*Bottom part - [[File:motorholder_top.fcstd]]
:*Top part - [[File:motorholder_top.fcstd]]
*Sensor Holder - [[File:8mmsensor_holder.fcstd]]
*Blower Holder - [[File:Blowerholder.fcstd]]
*Blower Holder - [[File:Blowerholder.jpg]]
*Nema 17 Stepper Motor - [[File:nema17stepper.fcstd]]
*Right Duct - [[File:rightduct.stl]] - [https://www.thingiverse.com/thing:2552794]
*Just holder part of 8 mm sensing sensor - [[File:sensorholderonly.fcstd]] or [[File:8mmsensor_holder.fcstd]].  [[File:sensorholderonly.stl]].


=Hole Jig=
=Hole Jig=
Line 40: Line 52:


https://docs.google.com/presentation/d/1eb3Z35rJdZ7DCF0JXA2dWnQV-9Him5bEF2uV4JeSYOo/edit#slide=id.p
https://docs.google.com/presentation/d/1eb3Z35rJdZ7DCF0JXA2dWnQV-9Him5bEF2uV4JeSYOo/edit#slide=id.p
=Links=
*[[D3D Extruder]]
*See [[D3D_Mini_PVC]] for later work as in [[3D Printer Genealogy]]

Latest revision as of 02:36, 26 February 2019


HintLightbulb.png Hint: This is being developed as a lightweight frame version of the D3D 3D Printer which allows for taking the workshop easily to remote locations - as otherwise each frame weigh 20 lb for 1/8" frame with 1.5" steel width. Further, we have the PVC pipe frame already in the D3D Workbench.

Development Template

edit

Note Extruder Steps Change to 408

D3D_v18.04_Software

Titan Aero + Fan

edit

Part Library

See https://github.com/OpenSourceEcology/3D-Printer-Part-Library. All files larger than 1 MB are stored on Github.

Large Files

  • Volcano Heater Block - [1]
  • Titan Aero - see source file from Lulzbot. See mirrored (to the correct orientation) at OSE Github - 1.5 MB - [2]
  • Volcano heater block. 1.6MB at Github - [3]. And File:Volcanoheater.fcstd.

Small Files

Hole Jig

edit

2017 Build 2 - Stephen Kaiser, San Francisco


2017 Build Example 1 - by Elie from Montreal at Factor e Farm

https://docs.google.com/presentation/d/1eb3Z35rJdZ7DCF0JXA2dWnQV-9Him5bEF2uV4JeSYOo/edit#slide=id.p

Links

Retrieved from "https://wiki.opensourceecology.org/index.php?title=D3D_PVC_pipe_8in_bed&oldid=186686"