CEB Press Build Instructions

This page will hold the final version of the Build Instructions after the wiki reorganization. This is a list of pages that might hold relevant info. These need to be consolidated here: --Conor 10:00, 20 February 2011 (PST)

• CEB Fabrication
• CEB Automation Prototype II
• Arduino Control of CEB Prototype 2
• FeF Liberator Fabrication
• Grate Shaker
• CEB Press 2
• CEB Automation Prototype II
• The Liberator Assembly
• The Liberator Full Release - Mechanical Fabrication
• dxf files
• [1]
• The_Liberator_Beta_v1.0_Specifications
• Bill_of_materials_for_The_Liberator_II
• pdfs
• Calculated_Bill_of_Materials_for_The_Liberator_Beta_v1.0
• The_Liberator_Master_Bill_of_Materials
• http://vimeo.com/22102016

---

From this page you will find information on how to build the different models of Compressed Earth Brick (CEB) press machines that the Open Source Ecology group have designed.

Part Fabrication Guides

1. Arms - primary
2. Arms - secondary
3. Feet
4. Frame with main cylinder
5. Grate mounts
6. Hopper sheet metal
7. Hopper mounting plate
8. Hopper supports
9. Hoses - Secondary cylinder hose unit
10. Hoses - Shaker and main cylinder
11. Hoses - Main hose unit
12. Legs
13. Roller guides
14. Secondary cylinder
15. Secondary cylinder sensor unit
16. Sensor - Main cylinder
17. Sensor - Secondary cylinder
18. Sensor - Soil
19. Soil grate
20. Soil loading drawer
21. Soil Shaker motor unit
22. Soil Shaker

Manual

• Hydraulic control valve

Automatic

• Controller box and cord
• Solenoid valve

Final Assembly and Job Site Setup

CEB Press Testing and Troubleshooting

Firmware

Source code can be found at github: https://github.com/OSE/ceb-controller

Old code:

• CEB Control Source Code v1.01 Annotated
• CEB Control Source Code v1.01
• CEB Control Source Code v1.0

• Control Code Site