Alex Au Log: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
 
(126 intermediate revisions by 2 users not shown)
Line 1: Line 1:
<html><iframe width="600" height="600" src="https://osedev.org/wiki/Alex?start=7/1/2018"></iframe></html>
{{RightTOC}}
== Hours Worked ==
<html><iframe width="600" height="350" src="https://osedev.org/wiki/Alex?start=7/1/2018"></iframe></html>


=Thu Sep 14, 2018=
This is a record of Alex Au's contributions to Open Source Ecology. Oct-Nov total is 258 hours.
* [[Immersion 001 Morning Meetings]]
= Fri Dec 7, 2018 =
* [[Kit Launch Project Management]]


pre-workshop adjustments
= Fri Nov 31, 2018 =
* INVENTORY: parts for 3 printers, plus 1-2 printers to use and print parts
* print: cable chain end piece needs a hole for m16?
* freeCAD and print: smaller extruder holder piece needs to have learger holes so you don't have to ream the holes , the 3 holes that hold the motor in (Ream the 3 holes using a power drill and a 4mm drill bit.
* freeCAD and print: put a notch in the duct for the large fan bc the clip that is supposed to close it gets blocked by this little bump sticking out


=Wed Sep 13, 2018=
= Thu Nov 30, 2018 =
*Welcomely / FullBuild - https://welcome.ly/p/VWcDgQiABfemvAC
* [[OSE Fellows Post-Mortem]]


= Mon Sep 10, 2018 =
= Wed Nov 29, 2018 =
* Assembly: https://docs.google.com/presentation/d/1dQPuo0tHr3wnP7MAigtNTv425M69HgO5AlSDLuAxTpQ/edit?usp=sharing
* [[D3D 3D Printer Manual v18.11]]
* Wire Routing and Final Touching: https://docs.google.com/presentation/d/1vUwm1JZS3i5IyRm7b4wBucN_K1ba2rugQk3jyxwf8Pc/edit?usp=sharing
* [https://docs.google.com/presentation/d/1wxU4fahWuoyCOdc7zsgX8Hur-aZWGca0Q5tuBizlHt8/edit#slide=id.p 6 Layer Documentation Template]
* [https://www.facebook.com/pg/oseworkshops/community/ Photo Thread for Day 1 of 3D Printer Build, Immersion Camp #1"]
* Tools needed for 3D print build: https://docs.google.com/presentation/d/1z-RoLI95bQQzUfuJCpoPG4tyTP5_T3tI6t6ZGzEVcg8/edit?usp=sharing
* [https://docs.google.com/drawings/d/1gS03PrwGHbT0kM7rDoeYTRbUui6fVufWMGa5MznaOGo/edit?usp=sharing 3d printer immersion flyer]
* [[Notable Open Source Players]]


=== freeCAD Adjustments ===
= Tue Nov 27, 2018 =
* cable chain end piece needs a hole for m16?
* [[Dev_Team_Involvement_Email]]
* end stops need a pad so that it can be glued instead of magnets
* create an OSE magnet as a take home gift
* adapter plate needs a pad
* smaller extruder holder piece needs to have learger holes so you don't have to ream the holes , the 3 holes that hold the motor in (Ream the 3 holes using a power drill and a 4mm drill bit.)
* put a notch in the duct for the large fan bc the clip that is supposed to close it gets blocked by this little bump sticking out


=== slides workflow ===
= Wed Nov 22, 2018 =
could switch to markdown with version control:
* Printer Build Prep
* https://github.com/gsuitedevs/md2googleslides
* https://publishing-project.rivendellweb.net/converting-markdown-to-slides/


can switch things from google docs to markdown for publishing:
= Tue Nov 21, 2018 =
* https://chrome.google.com/webstore/detail/export-as-markdown/hbojhdcnbcondcdfpfocpkjkfkbnbdad
* [[Alex Kit Build Log]]
* [[Alex Printer 1 Log]]


= Wed Sep 7, 2018 =
= Mon Nov 20, 2018 =
* [[OSE Legends]]  
* [[Quick Guide: Kit Certification Pictures]]
* [https://docs.google.com/presentation/d/1-wqWccvt0hOtOQlipV0TzmgV6OOTBKHLMPSZT06leuo/edit?usp=sharing 3d printer manual tensions, ideas, cross-talk]
* [[Kit Building Manual]]
* [https://en.wikipedia.org/wiki/Pin_header Pin Header Wiki]


= Wed Sep 5, 2018 =
= Fri Nov 16, 2018 =
[https://calendar.google.com/calendar/b/2?cid=dG1rM245bjhucmtnczJqaG9ucDRlbDQ3N2NAZ3JvdXAuY2FsZW5kYXIuZ29vZ2xlLmNvbQ Immersion Calendar (OSE Legends)]
* Went to a conference and spoke. Connected with Anthony from Open Insulin Project, Sudo Room, and others.
[https://www.youtube.com/watch?v=z6ygIrYhqd4 Great Russian Cartoon]


13 Days:
= Thu Nov 15, 2018 =
#1 & 2 day finish documentation - Need Marcin's time
=== Traction ===
#3 & 4 day instructor manual, sourcing of materials - Need Marcin's time
* Replied to Ethan from Port Makerspaces for Dec 15
#replicate build w/ manual
* Replied to Amy about remote builds
#day 5 * make your printer work.
* Replied to lead from Matthew to build 3d printers at schools, see [[Cold_Email_Cold_Phone_Call#Self_Intro_from_Referral_for_Schools]]
#day 6 * do 1 builds to make a 3D printers ---- free time for Marcin
# day 7 do a public printer
#day 8 * print parts for 1 day (like grinder) - includes getting all the print files, how to print, where the files are, variations in cura
#day 9 day design parts - freeCAD work to print file
#day 11 & 12 day certification test , * prep marketing, * do workshop  1. Build 2. everything around running the workshop, finding venue, getting parts, production engineering
#day 13 day marketing -- do


= Tue Sep 4, 2018 =
=== Product ===
Handbook Editing Checklist:
* [[Kit Building Manual Excel Sheet]]
* Simple Enough?: writing makes sense
* [[Alex Printer 1 Log]]
* Naming conventions: ex: use numbers
* Prior Knowledge: do ppl know what this is?
* Official Parts Name:
* Consistent tone: clear and accessible, trending towards informal, but specific
* Consistent instruction: for assembly like pieces, even if they're different, use close-to-the-same instruction as possible.
* Unique Step Naming: similar steps that are slightly different should be unique
* Explaining Differences: when things change, explain why.
* Pic + Text Cohesiveness: pic + text work together to explain how to do stuff.
* Pictures named as Figures: for easy reference


= Mon Sep 3, 2018 =
= Wed Nov 14, 2018 =
Wire Routing and Final Touching: https://docs.google.com/presentation/d/1vUwm1JZS3i5IyRm7b4wBucN_K1ba2rugQk3jyxwf8Pc/edit?usp=sharing
* [[Alex Kit Certification 1]]


Control Panel 1: https://docs.google.com/presentation/d/1bGoJ7T7Y26oi9NQTS1o30Oaw3tvnPTD7jWdnfiWRA2Q/edit#slide=id.p
= Tue Nov 13, 2018 =
* [[Alex Kit Certification 1]]


Control Panel 2: https://docs.google.com/presentation/d/1iQKjUccHetxacICyOPumA8Q-fRyK7kMl6DqspyTBixc/edit?usp=sharing
= Mon Nov 12, 2018 =
* [[Alex Kit Certification 1]]


Extruder : https://docs.google.com/presentation/d/172KqbjetnginKONsxB2fh9P-IjfuogUx-CAq8Cvx_4Q/edit#slide=id.p
= Thu Nov 9, 2018 =
* [[Markdown to PDF]]
* [[Kit Building Manual PDF]]
* [[Kit Building Manual Excel Sheet]]
* [[Kit Building Manual WYSIWYG Editor]]


Heated Bed : https://docs.google.com/presentation/d/1BJ1WMltjScTuQ7paGLvs0HMpxtESkitffxhm0d8K4Sc/edit?usp=sharing
= Wed Nov 7, 2018 =
* [[Onboarding Emails]]
Logging links below, no new additions.
* [[Kit_Certification]]. [[Sara_Kit_Certification]].
* [[Alex_Kit_Certification]]
* [[Alex_Printer_1_Log]].
* [[3D_Printer_Development_Data]].
* [[3D_Printer_Promo_Video]].


Frame : https://docs.google.com/presentation/d/1hyFU_mV8qGpV-hbHg9gOAYagN1vF-tqNdCh8p_B8hfc/edit#slide=id.p
= Fri Nov 2, 2018 =
* [[Kit Prep Walkthrough]]
= Thu Nov 1, 2018 =
* [[3D Printer Inventory::Alex]]
= Wed Oct 31, 2018 =
* [[Prepping for 1st Kit Building]]. [[Sense-making with Sara]].


Axis X, Y, Z: https://docs.google.com/presentation/d/1AKgYVq1v1WCgCvUxsRGYh2Awzl4s1mI75tHxGzxw0zg/edit?usp=sharing
== Highlighted Pages ==
=== 18.11 ===


Cable Chain + End Stops: https://docs.google.com/presentation/d/1gwybca08--vPJK7txn65uS88J1zeHRYDFC_BdHKE-Ak/edit?usp=sharing
=== 18.10 ===
* [[P:Documentation/Naming Conventions]]
* [[Nview:3D Printer/Workshop::Accessibility Improvements]]
* [https://docs.google.com/forms/d/115RKWY0l3KV33tGhmPhV78nIwHBL-mRYmF8jLb_6vm8/edit#responses P:3D Printer/Workshop/Feedback Loop::Workshop Quality Survey, Per Build Phase]
* [https://docs.google.com/presentation/d/1OsfsIR_780cZRJ5AYvIpPBenu0_HnW7YVH43tyUk2bQ/edit#slide=id.g454d00ba08_0_111 Ndoc:Onboarding/Email Sequence::Intro to OSE X 18.10]
* [[P:Documentation_Standards::Abbreviated#Instruction:_How_to_do_First_Pass_documentation]]


Assembly: https://docs.google.com/presentation/d/1dQPuo0tHr3wnP7MAigtNTv425M69HgO5AlSDLuAxTpQ/edit?usp=sharing
=== 18.9 X 18.8 X 18.7 ===
 
* [https://hackmd.io/FhrW0dJmRnmRstGFHImaxw Website Copy]
 
* [https://paper.dropbox.com/doc/What-if-you-and-the-people-around-you-could-re-design-your-world--ANkuCb~cv1Wxmyu5_N4LMGJxAg-CBKRHs6cbPzdUmzEk7VqH Original Draft of Website Copy]
 
* [https://welcome.ly/p/VWcDgQiABfemvAC Welcome.ly Full Build Copy]
[[Holacracy-based_Decision-making_Process]]
* [https://docs.google.com/presentation/d/1wxU4fahWuoyCOdc7zsgX8Hur-aZWGca0Q5tuBizlHt8/edit#slide=id.p 6 Layer Documentation Template]
 
* [[Alex Au Intro to OSE for Parents]]
[https://docs.google.com/presentation/d/1wxU4fahWuoyCOdc7zsgX8Hur-aZWGca0Q5tuBizlHt8/edit#slide=id.p 6 Layer Documentation Template]
* [[Alex Au Process for Persuading Parents to Support OSE Immersion]]
 
* [[How to Create an OSE Linux USB using Mac Guide by Alex Au 2018]]
[https://www.facebook.com/pg/oseworkshops/community/ Photo Thread for Day 1 of 3D Printer Build, Immersion Camp #1"]
* [[Talk Proposal: Climate Change and Open Source Ecology]]
 
Tools needed for 3D print build: https://docs.google.com/presentation/d/1z-RoLI95bQQzUfuJCpoPG4tyTP5_T3tI6t6ZGzEVcg8/edit?usp=sharing
 
=Sun Sep 2, 2018=
[https://paper.dropbox.com/doc/Governance-Process-RE-Proposals--ALzwAIoQSq~7l1aaZUbGFjWTAg-3gm9uyCFULxZKPEmDmDIv Decision-making Process for Governance Based On Holacracy] [https://paper.dropbox.com/doc/Governance-Meeting-Structure--ALyXotuzGoChBNvE3rk6t1HDAg-2zqhJnBasnUPUpWpQUsrT How STAR structures a Goverannce Meeting]
 
=Tue Aug 14, 2018=
Read emails, synced w/ Sara on [Talk:Photogrammetry_101_with_Harman]
 
=Sat Aug 11, 2018=
[[Talk Proposal: Climate Change and Open Source Ecology]]
 
=Thu Aug 9, 2018=
Read offer letter carefully again and added to discussion. [[Talk:Conflict Resolution]] | [[Talk:Daily_Log_of_Tasks]]
 
=Wed Aug 8, 2018=
[[Notes on Mechanical Devices for the Electronics Experimenter#Overview of Chapters not-relevant to building lasers: 2-6]]
 
=Tue Aug 7, 2018=
[https://www.are.na/alex-au/laser-definitions-vocabulary-ose Laser Definitions Vocabulary OSE Laser]
 
=Mon Aug 6, 2018=
This Week's Goals:
* Identify top 3 prior art CO2 lasers
* Create initial design on paper
* Begin mocking in CAD
 
=Sun Aug 5, 2018=
[https://www.are.na/alex-au/design-laser-ose Design Laser Links ]
 
=Fri Aug 3, 2018=
[[List of Book Locations for CO2 Laser Research in Chicago]] | [https://www.are.na/alex-au/build-laser-ose Curated Online Research for CO2 Laser Research] | [[Notes on Mechanical Devices for the Electronics Experimenter]]
 
=Thu Aug 2, 2018=
Time spent Getting Support for OSE Immersion:
* Curate Links -- 2 hours
* Chats with Parents & Family -- 3 hours
 
[[Alex Au Intro to OSE for Parents]] | [[Alex Au Process for Persuading Parents to Support OSE Immersion]] | [[How to Create an OSE Linux USB using Mac Guide by Alex Au 2018]]
 
=Wed Aug 1, 2018=
 
[[Presentation Template]]
 
<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vR4wY2ed8ELDFH9R3suH7tBuKUqSgtp8CeIGp-cVjhLhlQ1-kQhRdMD7jsmqWkRGDFBUSJf3tD6hZ3n/embed?start=false&loop=false&delayms=3000" frameborder="0" width="960" height="569" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>
 
[https://docs.google.com/presentation/d/1HqNgsuT2R3WsWt3vURd8EZtXbUW-I2V_g_TQnaFCHjY/edit#slide=id.g1861bf60d5_0_6 edit]
 
=Tue July 31, 2018=
Time spent on OSE developer test:
* Installing Linux — 10-15 hours
* Learning FreeCAD — 15-20 hours
* Documenting Work — 5 hours
 
Self Grade:
95/100 | Mis-edited portion of video documentation near the beginning. Got cube together. Also ran into trouble with tubes being re-positioned when fastening bolts.


Links:
== Archive ==
[[Alex Au's Feedback on Developer Test]] | [https://drive.google.com/open?id=1ErIRzy72uCoSsTkfBBcgElhr1duxTIOh Link to FreeCAD file of cube] | [https://youtu.be/eVIdVMIsobw Video Documentation of Alex Au's OSE Developer Test]
* [[Nmap:Alex_Au_Log::18.10]]
* [[Nmap:Alex Au Log::18.9 X 18.8 X 18.7]]


=Links=
== Other Helpful Links ==
*[[Alex Au]] - notes from interview conversations
Alex's Selection:
* [[Priorities]]
* [[Daily Standup Log]]
* [[Venue_Selection_Protocol]]
----
Documentation Guidelines:
* [[Documentation_Standards:_Abbreviated]]
* [[Wiki Cheatsheet]]
* [https://www.mediawiki.org/wiki/Help:Formatting Mediawiki Formatting Help]
* [[Daily_Log_of_Tasks]]
----
Team Logs: [[Development_Team_Log]] : [[Marcin_Log]] : [[Sara Bajor Log]] : [[Dixon Log]] : [[Alex Au Log]]
* [[Development_Team_Log#Active_Developer_Logs]]
----
To reach me, send a note to alex at open source ecology dot org (no spaces).

Latest revision as of 21:44, 7 December 2018

Hours Worked

This is a record of Alex Au's contributions to Open Source Ecology. Oct-Nov total is 258 hours.

Fri Dec 7, 2018

Fri Nov 31, 2018

Thu Nov 30, 2018

Wed Nov 29, 2018

Tue Nov 27, 2018

Wed Nov 22, 2018

  • Printer Build Prep

Tue Nov 21, 2018

Mon Nov 20, 2018

Fri Nov 16, 2018

  • Went to a conference and spoke. Connected with Anthony from Open Insulin Project, Sudo Room, and others.

Thu Nov 15, 2018

Traction

Product

Wed Nov 14, 2018

Tue Nov 13, 2018

Mon Nov 12, 2018

Thu Nov 9, 2018

Wed Nov 7, 2018

Logging links below, no new additions.

Fri Nov 2, 2018

Thu Nov 1, 2018

Wed Oct 31, 2018

Highlighted Pages

18.11

18.10

18.9 X 18.8 X 18.7

Archive

Other Helpful Links

Alex's Selection:

Documentation Guidelines:

Team Logs: Development_Team_Log : Marcin_Log : Sara Bajor Log : Dixon Log : Alex Au Log

To reach me, send a note to alex at open source ecology dot org (no spaces).

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Alex_Au_Log&oldid=182800"