Latest revision as of 09:08, 12 December 2019

Notes

21:44, 29 October 2019 - added a bunch of holes to clean up wire routing, removed 1 unused hole.
Added hole in 16:57, 29 May 2019 but source for this is an exported STEP of former bent panel. Had issues poking out the hole.
Bend version history - Started with 14:18, 3 May 2019. Added the wire lock and trimmed edges for frame fit. To arrive at 15:55, 4 May 2019
Final simplified version as a single compound - 20:00, 3 May 2019. Ready to print.
Final version including sketches, without bend, is 13:17, 3 May 2019.
11:37, 3 May 2019 is the final panel including components, but without the panel refinements for printing optimization (overhangs removal)
5/3/2019 13:00 version is fine for printing on one print bed. Next versions are for vertical print and bend.
5/3/2019 version compound without holes did not work - deletef it - if there are the twinkles in the object, it may be a shell only in STL form. Cura result was broken. Went back to the plain file, rebuilt side rails. I could not get the twinkle out while retaining full build.
Start with Control panel with everything in a pile.

Note that version 19:14, 3 May 2019 is half the memory. It appears to be a compound, but is really a 'pseudocompound', meaning it can't be pocketed or padded. See FreeCAD Workarounds.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	09:08, 12 December 2019	(133 KB)	Marcin (talk \| contribs)	Named properly in part tree.
	09:07, 12 December 2019	(133 KB)	Marcin (talk \| contribs)	Compound of last file.
	09:06, 12 December 2019	(142 KB)	Marcin (talk \| contribs)	Dumb version of last file
	03:10, 30 October 2019	(368 KB)	Marcin (talk \| contribs)	Added missing hole.
	02:44, 30 October 2019	(367 KB)	Marcin (talk \| contribs)	Added all the holes for cleaning up wire routing. Moved screen left by around 10 mm.
	21:57, 29 May 2019	(190 KB)	Marcin (talk \| contribs)	Added hole for GFCI screw
	20:55, 4 May 2019	(340 KB)	Marcin (talk \| contribs)	Bent and trimmed compound, ready for printing.
	20:34, 4 May 2019	(215 KB)	Marcin (talk \| contribs)	Bend panel with wirelock, compound.
	01:22, 4 May 2019	(104 KB)	Marcin (talk \| contribs)	Compound of the last version.
	00:59, 4 May 2019	(144 KB)	Marcin (talk \| contribs)	Trimmed outer rails so panel sits in frame

You cannot overwrite this file.

The following 9 pages use this file:

@@ Line 1: / Line 1: @@
 =Notes=
-*Bend version history - from '''14:18, 3 May 2019''' to
+*21:44, 29 October 2019 - added a bunch of holes to clean up wire routing, removed 1 unused hole.
+*Added hole in '''16:57, 29 May 2019''' but source for this is an exported STEP of former bent panel. Had issues poking out the hole.
+*Bend version history - Started with '''14:18, 3 May 2019'''. Added the wire lock and trimmed edges for frame fit. To arrive at '''15:55, 4 May 2019'''
 *Final simplified version as a single compound  - '''20:00, 3 May 2019'''. Ready to print.
 *Final version including sketches, without bend, is '''13:17, 3 May 2019'''.
@@ Line 10: / Line 12: @@
 =Bugs=
 *Note that version ''19:14, 3 May 2019'' is half the memory. It appears to be a compound, but is really a 'pseudocompound', meaning it can't be pocketed or padded. See [[FreeCAD Workarounds]].
+=History=
+[[File:panel-14-26-2-May-2019.png|100px]]
+<gallery perrow=6>
+File:panel-14-26-2-May-2019.png|'''Control panel history File:panel_14:26,_2_May_2019'''
+</gallery>
+*Panel 14:26, 2 May 2019