D3D Part Library: Difference between revisions
| Line 14: | Line 14: | ||
<gallery perrow=6> | <gallery perrow=6> | ||
File:d3dframe_freecad.jpg|''' | File:d3dframe_freecad.jpg|'''Sensor Holder.''' - Generated in [[BlocksCAD]]. STL - [[File:sensholder.stl]] | ||
File:Motorside.jpg|[[File:check.png]]'''Motor Side of Axis''' - FreeCAD -[[File:Universal_axis_motor_side.fcstd]]. STL - [[File:Universal axis motor side.stl]] | File:Motorside.jpg|[[File:check.png]]'''Motor Side of Axis''' - FreeCAD -[[File:Universal_axis_motor_side.fcstd]]. STL - [[File:Universal axis motor side.stl]] | ||
Revision as of 21:16, 25 April 2017
5/16" or 8 mm Rod Version
Hint: Once all the parts here are stable, we will create a FreeCAD D3D Workbench which includes a drag-and-drop of every part within FreeCAD
Small version for small machines such as 3D printer, small laser cutter, and CNC circuit mill
- D3dframe freecad.jpg
Sensor Holder. - Generated in BlocksCAD. STL - File:Sensholder.stl
Motor Side of Axis - FreeCAD -File:Universal axis motor side.fcstd. STL - File:Universal axis motor side.stl
Carriage Side - FreeCAD - File:Universal axis carriage side.fcstd. STL - File:Universal axis carriage side.stl
Short Idler Side - FreeCAD - File:Universal Axis Idler Side short version.fcstd. STL - File:Universal Axis Idler Side short version.stl.
Top extruder Mount - FreeCAD - File:D3D Mini Sub-Assembly Extruder Top Mount.fcstd. STL via BlocksCAD mod of FreeCAD STL export - File:TopExtrudermount.stl
Idler Side Axis Full Size - FreeCAD - File:Idler side printed axis half freecad.fcstd. This probably needs to be converted to the file from Manolis Log with a version history?
Belt Holding Peg - FreeCAD original size - File:Peg 8mm rods.fcstd. STL at 85% size, works well - File:Peg 8mm rods.stl
Frame Extender - FreeCAD by Emmanouil Log - File:D3D Axis Extension.fcstd. STL - File:D3D Axis Extension.stl
Right Y Axis - FreeCAD - File:D3D Right Y Axis.fcstd.
M6x18 Axis Hex Bolt - FreeCAD - File:M6x18.fcstd. Image needs to be updated to 18 mm long bolt. Ok, this is a little confusing - FreeCAD allows bolts in step of 5mm so how do we do an 18mm bolt? Need to create it by subtracting a few mm
M6x30 Axis Hex Bolt - FreeCAD - File:M6x30.fcstd. 30 mm version connecting X axis to Y axis.
Axis Hex Nut - FreeCAD - File:Axis hex nut freecad.fcstd.
Magnet - FreeCAD - File:Neodymium magnet freecad.fcstd. Magnets should be 12x3 mm, this one appears to be 10 mm.
Flanged Bearing - goes on the idler 3D printed piece. FreeCAD - File:Pulley.fcstd.
- -----------------------------------------------------------------------------
- Extender.jpgFlanged Bearing - goes on the idler 3D printed piece. FreeCAD - File:Pulley.fcstd.
Carriage Linear Bearing - FreeCAD - File:Carriage linear bearing freecad.fcstd.
Nema 17 Stepper Motor - FreeCAD - File:Nema 17 stepper motor freecad.fcstd.
X Axis Belt - FreeCAD - File:8mm belt x axis freecad.fcstd. Belt needs to be 6 mm wide, 2mm pitch (GT2 belt)
- Previewfilename.jpg
Part name - FreeCAD - File:Freecadfilename.fcstd.
Deprecated
Motor Side, short - File:Universal Axis Motor Side short version.fcstd.
20 Tooth Timing Pulley - FreeCAD - File:20 tooth pulley freecad.fcstd. This is an extruder driver gear, not 20 tooth pulley. See D3D BOM 2 Week BOM for the correct part.
Bigger Pictures
