D3D Part Library: Difference between revisions
No edit summary |
No edit summary |
||
| Line 39: | Line 39: | ||
File:M6x18-screw.png|'''M6x18 Axis Hex Bolt''' - FreeCAD - [[File:m6x18.fcstd]]. '''Marcin plz confirm'' | File:M6x18-screw.png|'''M6x18 Axis Hex Bolt''' - FreeCAD - [[File:m6x18.fcstd]]. '''Marcin plz confirm'' | ||
File:m6x30.jpg|[[File:check.png]]'''M6x30 Axis Hex Bolt''' - FreeCAD - [[File:m6x30.fcstd]]. 30 mm version connecting X axis to Y axis. | File:m6x30.jpg|[[File:check.png]]'''M6x30 Axis Hex Bolt''' - FreeCAD - [[File:m6x30.fcstd]]. 30 mm version connecting X axis to Y axis. '''EDITED after Marcin's confirmation''' | ||
File:Axis hex nut.jpeg|'''Axis Hex Nut''' - FreeCAD - [[File:Axis hex nut freecad.fcstd]]. | File:Axis hex nut.jpeg|'''Axis Hex Nut''' - FreeCAD - [[File:Axis hex nut freecad.fcstd]]. | ||
Revision as of 02:41, 26 April 2017
5/16" or 8 mm Rod Version
Hint: Once all the parts here are stable, we will create a FreeCAD D3D Workbench which includes a drag-and-drop of every part within FreeCAD
Small version for small machines such as 3D printer, small laser cutter, and CNC circuit mill
Endstop. - FreeCAD - File:D3D End Stop Switch.fcstd
Sensor Holder. - Generated in BlocksCAD. STL - File:Sensholder.stl
- D3dframe freecad.jpg
Frame - FreeCAD -File:D3dframe.fcstd. STL - not 3d printer. Another version will be 3D printed.
Motor Side of Axis - FreeCAD -File:Universal axis motor side.fcstd. STL - File:Universal axis motor side.stl
Carriage Side - FreeCAD - File:Universal axis carriage side.fcstd. STL - File:Universal axis carriage side.stl
Short Idler Side - FreeCAD - File:Universal Axis Idler Side short version.fcstd. STL - File:Universal Axis Idler Side short version.stl.
Top extruder Mount - FreeCAD - File:D3D Mini Sub-Assembly Extruder Top Mount.fcstd. STL via BlocksCAD mod of FreeCAD STL export - File:TopExtrudermount.stl
Idler Side Axis Full Size - FreeCAD - File:Idler side printed axis half freecad.fcstd. This probably needs to be converted to the file from Manolis Log with a version history?
Belt Holding Peg - FreeCAD original size - File:Peg 8mm rods.fcstd. STL at 85% size, works well - File:Peg 8mm rods.stl
Frame Extender - FreeCAD by Emmanouil Log - File:D3D Axis Extension.fcstd. STL - File:D3D Axis Extension.stl
Right Y Axis - FreeCAD - File:D3D Right Y Axis.fcstd.
'M6x18 Axis Hex Bolt - FreeCAD - File:M6x18.fcstd. Marcin plz confirm
M6x30 Axis Hex Bolt - FreeCAD - File:M6x30.fcstd. 30 mm version connecting X axis to Y axis. EDITED after Marcin's confirmation
Axis Hex Nut - FreeCAD - File:Axis hex nut freecad.fcstd.
Magnet - FreeCAD - File:Neodymium magnet freecad.fcstd. Magnets should be 12x3 mm, this one appears to be 10 mm.
Flanged Bearing - goes on the idler 3D printed piece. FreeCAD - File:Pulley.fcstd.
- -----------------------------------------------------------------------------
- Extender.jpgFlanged Bearing - goes on the idler 3D printed piece. FreeCAD - File:Pulley.fcstd.
Carriage Linear Bearing - FreeCAD - File:Carriage linear bearing freecad.fcstd.
Nema 17 Stepper Motor - FreeCAD - File:Nema 17 stepper motor freecad.fcstd.
X Axis Belt - FreeCAD - File:8mm belt x axis freecad.fcstd. Belt needs to be 6 mm wide, 2mm pitch (GT2 belt)
- Previewfilename.jpg
Part name - FreeCAD - File:Freecadfilename.fcstd.
Deprecated
Motor Side, short - File:Universal Axis Motor Side short version.fcstd.
20 Tooth Timing Pulley - FreeCAD - File:20 tooth pulley freecad.fcstd. This is an extruder driver gear, not 20 tooth pulley. See D3D BOM 2 Week BOM for the correct part.
Bigger Pictures
