D3D Pro: Difference between revisions
(→CAD) |
(→CAD) |
||
| Line 20: | Line 20: | ||
File:rightcorner.png|'''Angle Connector with axis mount, right side.''' - FreeCAD - [[File:rightcorner.fcstd]]. Finished STL - [[File:rightcorner.stl]] | File:rightcorner.png|'''Angle Connector with axis mount, right side.''' - FreeCAD - [[File:rightcorner.fcstd]]. Finished STL - [[File:rightcorner.stl]] | ||
File:Motorside.jpg|[[File:check.png]]'''[10] Motor Side of Axis''' - 221k - FreeCAD -[[File:Universal_axis_motor_side.fcstd]]. STL - [[File:Universal axis motor side.stl]] | |||
File:simplecarriage.png|Universal axis carriage: [[File:Universal_axis_carriage_side.fcstd]]. STL - [[File:Universal_axis_carriage_side.stl]] | |||
File:idlershort.jpg|[[File:check.png]]'''[10] Short Idler Side''' - 75k - FreeCAD - [[File:Universal_Axis_Idler_Side_short_version.fcstd]]. STL - [[File:Universal_Axis_Idler_Side_short_version.stl]]. | |||
File:yaxisfroma1906.png|'''Y Axis from v19.06.''' - FreeCAD - [[File:yaxisfrom1906.fcstd]]. | File:yaxisfroma1906.png|'''Y Axis from v19.06.''' - FreeCAD - [[File:yaxisfrom1906.fcstd]]. | ||
Revision as of 00:27, 7 February 2020
You can get a ready-to-build kit at https://www.opensourceecology.org/d3d-pro/
CAD
D3D v19.11 - FreeCAD -File:D3d1911.fcstd
16" Frame - FreeCAD -File:Frame16.fcstd
Angle Connector. - FreeCAD with McMaster 6 mm nut -File:Angleconnector.fcstd. Finished STL - File:Anglecorner.stl
Angle Connector with axis mount, left side. - FreeCAD - File:Leftcorner.fcstd. Finished STL - File:Leftcorner.stl
Angle Connector with axis mount, right side. - FreeCAD - File:Rightcorner.fcstd. Finished STL - File:Rightcorner.stl
![[10] Motor Side of Axis - 221k - FreeCAD -File:Universal axis motor side.fcstd. STL - File:Universal axis motor side.stl](/images/thumb/4/45/Motorside.jpg/120px-Motorside.jpg)
[10] Motor Side of Axis - 221k - FreeCAD -File:Universal axis motor side.fcstd. STL - File:Universal axis motor side.stl
Universal axis carriage: File:Universal axis carriage side.fcstd. STL - File:Universal axis carriage side.stl
![[10] Short Idler Side - 75k - FreeCAD - File:Universal Axis Idler Side short version.fcstd. STL - File:Universal Axis Idler Side short version.stl.](/images/thumb/a/ae/Idlershort.jpg/120px-Idlershort.jpg)
[10] Short Idler Side - 75k - FreeCAD - File:Universal Axis Idler Side short version.fcstd. STL - File:Universal Axis Idler Side short version.stl.
Y Axis from v19.06. - FreeCAD - File:Yaxisfrom1906.fcstd.
X axis from v19.06. - FreeCAD - File:Xaxisfrom1906.fcstd.
Carriage motor merge. - FreeCAD - File:Carriage motor merge.fcstd. STL - File:Carriage motor merge.stl
Carriage half-carriage merge. - FreeCAD - File:Carriage halfcarriage merge.fcstd. STL - File:Carriage halfcarriage merge.stl.
Carriage extruder bracket merge. - FreeCAD - File:Integrated carriage.fcstd. STL - File:Integrated carriage.stl
Frame clip - FreeCAD - File:Frameclip.fcstd. STL - File:Frameclip.stl
'Carriage to bed connection. - FreeCAD - File:Carriage idler merge.fcstd. STL - File:Carriagebed.stl
'Motor side with clip. - FreeCAD - File:Motorwithclip.fcstd. STL - File:Motorwithclip.stl
'Idler side with clip. - FreeCAD - File:Idlerwithclip.fcstd. STL - File:Idlerwithclip.stl
'Cable clip. - FreeCAD - File:Cableclip.fcstd. STL - File:Cableclip.stl
'Cable clip for end of axis nut catch. - FreeCAD - File:Cableclip2.fcstd. STL - File:Cableclip2.stl
![[10] Belt Holding Peg - FreeCAD original size - File:Peg 8mm rods.fcstd. STL at 85% size, works well - File:Peg 8mm rods.stl](/images/thumb/a/a5/Peg85.jpg/120px-Peg85.jpg)
[10] Belt Holding Peg - FreeCAD original size - File:Peg 8mm rods.fcstd. STL at 85% size, works well - File:Peg 8mm rods.stl
![Spool Holder. File: File:Spoolholder.stl Link for more types of these joints - [1]](/images/thumb/d/d6/Spoolholderjoint.jpg/120px-Spoolholderjoint.jpg)
Spool Holder. File: File:Spoolholder.stl Link for more types of these joints - [1]
![[10] Motor Side of Axis - 221k - FreeCAD -File:Universal axis motor side.fcstd. STL - File:Universal axis motor side.stl](/wiki/File:Motorside.jpg)
![[10] Short Idler Side - 75k - FreeCAD - File:Universal Axis Idler Side short version.fcstd. STL - File:Universal Axis Idler Side short version.stl.](/wiki/File:Idlershort.jpg)
![[10] Belt Holding Peg - FreeCAD original size - File:Peg 8mm rods.fcstd. STL at 85% size, works well - File:Peg 8mm rods.stl](/wiki/File:Peg85.jpg)
![Spool Holder. File: File:Spoolholder.stl Link for more types of these joints - [1]](/wiki/File:Spoolholderjoint.jpg)
BOM
Quick attach wiring.
Connector 1
| Extruder part | N° | Wire color |
|---|---|---|
| Heat sink fan | 1 | + red |
| 2 | - black | |
| Thermistor | 3 | orange |
| 4 | white | |
| Heater element | 5 | green |
| 6 | yellow | |
| Active cooling fan | 7 | + brown |
| 8 | - blue |
Connector 2
| Extruder part | N° | Wire color |
|---|---|---|
| Z-probe | 1 | brown |
| 2 | blue | |
| 3 | black | |
| Extruder stepper motor | 4 | green |
| 5 | yellow | |
| 6 | orange | |
| 7 | red |
Bugs
- Card slot 3D print - notch too large, card can be pushed in behind the slot
- Get rid of STOP PRINT from menu - can hit it accidentally during long print
- Fix belt hole in carriage to motor
- Fix carriage to idler placement
- Improvement - Flexible surface for popping prints right off
Links
- D3D v19.06 - other parts
Product
Production Manual
Links
- Eric's proposal - Eric D3D Pro Proposal