Category:Status: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
Line 8: Line 8:
Some more details for the 2 month plan above are:
Some more details for the 2 month plan above are:


*[[Solar Power Generator]] - see [http://openfarmtech.org/index.php?title=Distillations#Factor_e_Live_Distillations_Part_8_-_Solar_Power_Generator Distillation] on the topic
Habitat construction:
*We are now finishing the [[Babington Burner]] application to the hybrid masonry stove. Marcin is project leader.
*[[Nathan]] is working on the [[Solar Microhut]] design
*[[LifeTrac]] upgrades involve larger motor mount bolts, a one day task.
*[[LifeTrac]] upgrades involve larger motor mount bolts, a one day task.
Agroecology:
*Vegetable Plan needs to be outlines for raised bed chinampa system. We can make reaised beds with various scrap material from on-site.
*Vegetable Plan needs to be outlines for raised bed chinampa system. We can make reaised beds with various scrap material from on-site.
*[[MicroTrac]] needs to be designed. We're presently looking at building it, with a 12-15 hp off-shelf diesel engine. We will have chipper, tiller, mower, and baler attachement.
*Site Plan - permacultural design of entire facility needs to be drawn out, including 30 connected [[Solar Microhut]]s.
Fabrication:
*Metal melt-down of old industrial detritus scrap, such as broken tractors replaced by [[LifeTrac]] - could be our first major political statement - if we develop the metal melting furnace [[Foundry]]. This is a high priority item, '''needs project leader'''.
*Metal melt-down of old industrial detritus scrap, such as broken tractors replaced by [[LifeTrac]] - could be our first major political statement - if we develop the metal melting furnace [[Foundry]]. This is a high priority item, '''needs project leader'''.
*[[Torch Table]] needs to be built, 3D design is in review.
*[[Torch Table]] needs to be built, 3D design is in review.
*[[Lathe]] required a day to draw up in 3D, and is to be in-sourced to [[True Fans]].
*[[Lathe]] required a day to draw up in 3D, and is to be in-sourced to [[True Fans]].
*[[Nathan]] is working on the [[Solar Microhut]] design
 
Energy:
*[[Solar Power Generator]] - see [http://openfarmtech.org/index.php?title=Distillations#Factor_e_Live_Distillations_Part_8_-_Solar_Power_Generator Distillation] on the topic
*We are now finishing the [[Babington Burner]] application to the hybrid masonry stove. Marcin is project leader.
*[[Steam Engine Construction Set]] needs work. Engine design work is not yet complete as of 2.7.09.
*[[Steam Engine Construction Set]] needs work. Engine design work is not yet complete as of 2.7.09.
*[[MicroTrac]] needs to be designed. We're presently looking at building it, with a 12-15 hp off-shelf diesel engine. We will have chipper, tiller, mower, and baler attachement.
*Site Plan - permacultural design of entire facility needs to be drawn out, including 30 connected [[Solar Microhut]]s.
*[[Flash Steam Generator]] needs Project Leader.
*[[Flash Steam Generator]] needs Project Leader.



Revision as of 18:44, 11 February 2009

Introduction

Here is the present status, as of Feb. 7, 2009 - a 2 month plan. See the status of individual projects below.

020709status.jpg

Details

Some more details for the 2 month plan above are:

Habitat construction:

Agroecology:

  • Vegetable Plan needs to be outlines for raised bed chinampa system. We can make reaised beds with various scrap material from on-site.
  • MicroTrac needs to be designed. We're presently looking at building it, with a 12-15 hp off-shelf diesel engine. We will have chipper, tiller, mower, and baler attachement.
  • Site Plan - permacultural design of entire facility needs to be drawn out, including 30 connected Solar Microhuts.

Fabrication:

  • Metal melt-down of old industrial detritus scrap, such as broken tractors replaced by LifeTrac - could be our first major political statement - if we develop the metal melting furnace Foundry. This is a high priority item, needs project leader.
  • Torch Table needs to be built, 3D design is in review.
  • Lathe required a day to draw up in 3D, and is to be in-sourced to True Fans.

Energy:

Goals

  • We need people to work on projects
    • Need more buildings for people
  • need infrastructure for buildings for people
    • Funding for basic infrastructure by March 2009
      • So we need $8000 to jump start infrastructure
  • need food for people


  • need production tools for projects