Polemidis Log: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
No edit summary
Line 4: Line 4:
<html><iframe src="https://scrumy.com/d3d" height=350 width=750></iframe></html>
<html><iframe src="https://scrumy.com/d3d" height=350 width=750></iframe></html>


=Friday Mar 24=
=Sun Mar 26, 2017
*[[File:D3D Axis Extension.fcstd]]
*[[File:D3D Mini CAD Assembly.fcstd]]
 
=Sat Mar 25, 2017=
*[[File:D3D Mini CAD Assembly.fcstd]]
 
=Fri Mar 24, 2017=
*[[File:D3D Mini CAD Assembly.fcstd]] '''In progress. It needs [[File:Universal Axis Motor Side short version.fcstd]] + [[File:Universal Axis Idler Side short version.fcstd]]
*[[File:D3D Mini CAD Assembly.fcstd]] '''In progress. It needs [[File:Universal Axis Motor Side short version.fcstd]] + [[File:Universal Axis Idler Side short version.fcstd]]
The assembly workbench has a few bugs, but the overall procedure works fast. There is a need for a tutorial/guide. A new user CANNOT work it out of the box without too much hussle.
The assembly workbench has a few bugs, but the overall procedure works fast. There is a need for a tutorial/guide. A new user CANNOT work it out of the box without too much hussle.
4.5h
 


=Thu Mar 23,2017=
=Thu Mar 23,2017=
*[[File:Universal Axis Motor Side short version.fcstd]]
*[[File:Universal Axis Motor Side short version.fcstd]]
*[[File:D3D Mini CAD Assembly.fcstd]]  
*[[File:D3D Mini CAD Assembly.fcstd]]  
2.5h
 


=Wed Mar 22,2017=
=Wed Mar 22,2017=
*[[File:D3D frame assembly guide.fcstd]]. Steps for different gauges. Cut corner for easier application of glue
*[[File:D3D frame assembly guide.fcstd]]. Steps for different gauges. Cut corner for easier application of glue
0.5
 
=Tue Mar 21, 2017=
=Tue Mar 21, 2017=
*[[File:D3D frame assembly guide.fcstd]]
*[[File:D3D frame assembly guide.fcstd]]
Line 23: Line 30:
=Mon Mar 20, 2017=
=Mon Mar 20, 2017=
*[[File:Universal Axis Idler Side short version.fcstd]]
*[[File:Universal Axis Idler Side short version.fcstd]]
1h
 


=Fri Mar 17, 2017=
=Fri Mar 17, 2017=

Revision as of 03:17, 27 March 2017

Emmanouil the Greek. Time Sheet. Jose Log. Cedric Log. Brian Log. Sile Log. Marcin Log. Jonathan Log. Hart Log. Richard Log. Jonathan Log

=Sun Mar 26, 2017

Sat Mar 25, 2017

Fri Mar 24, 2017

The assembly workbench has a few bugs, but the overall procedure works fast. There is a need for a tutorial/guide. A new user CANNOT work it out of the box without too much hussle.


Thu Mar 23,2017


Wed Mar 22,2017

Tue Mar 21, 2017

No sound, but details at Youtube description -for the first version of the file, does not apply to the stepped version

Mon Mar 20, 2017


Fri Mar 17, 2017

Mon Mar 13, 2017

http://opensourceecology.org/wiki/D3D_Meeting_Log

Sun Mar 12, 2017

Sat Mar 11, 2017

3D Printed Frame testing:

Wed Mar 8, 2017


Tue Mar 7,2017


Mon Mar 6,2017

Redesigned to correct orientation the extruder mount File:Motor interface.fcstd , File:Motor interface.stl

Sat Mar 4, 2017

Trying to convert to solid the extruder

Fri Mar 3,2017

File:D3D CAD Assembly.fcstd, File:D3D X Axis Simple.fcstd

Wed Mar 1,2017

File:Motor interface.fcstd , File:Motor interface.stl

Mon Feb 27,2017

  • OSE Developers Meeting
  • Reviewed the axis setup. Found lots of errors.
  • Added pulley to idler axis. Changed the size to 6×12×4. The 6×10×3 was leaving to much of a gap and the belt would fell through
  • Changed the size of the 4x20 Philips screw to 6x16 socket bolt to match the rest bolts (serves as shaft for the bearing). One less different item at the BOM.
  • Replaced 2 bolts at the Carriage axis with M6x30 (serve as mount of the X axis). These bolts do not exist at the BOM.
  • BOM includes some M6x40 hex bolts (not sockets) that they do not look to fit anywhere.
  • Rotated the motor 90° so that the cable adapter is upwards instead of downwards.
  • The motor shaft, in the CAD looks like it is 2mm longer(26mm) than the width of the motor axis(24mm). Needs confirmation that this is an actual bug.

put the above to some bug report page?

  • Added the LM8UU bearings inside the carriage.


Fri Feb 24,2017


Wed Feb 22,2017

BroughtFile:D3D CAD Assembly.fcstd up to the http://opensourceecology.org/wiki/D3D_Integration standards. Needs to be updated with the axes sub-assemblies


File:Portable farmstand.fcstd

Tue Feb 21,2017

  • Started to assemble the D3D CAD file. This is just a early snapshot
  • File:D3D CAD Assembly.fcstd
  • 1st attempt to extrude the frame from the .dxf file but the dimensions were not real.

  • Nice. Whenever doing videos that people learn from, please record your voice too, as that gives more information


Mon Feb 20,2017

3DP OSE Developers Meeting Getting up to date, reviewing the D3D wiki pages, getting ready to CAD the frame. Clearing my files from CAD junk and outdated files


Sun Feb 19,2017

  • Magnet holes

  • How to remove background from images (make anything than the model transparent) with Gimp[[1]] [[2]]


Sat Feb 18,2017

I used M4 nuts for the nut catcher, but for the screws I used added the https://www.mcmaster.com/#90116a217/=14gcc4s that are already in the universal axis, in order to avoid adding a new item to the BOM


Fri Feb 17,2017


Thu Feb 16,2017

  • Working on the interface plate for the motor.

Uploaded an early prototype image here https://docs.google.com/presentation/d/1kY7kP4ktcQKncVK8DTZ8BorsePT0FEozmA62Vswyv2w/edit#slide=id.g1c932a8c0a_0_55


Tue Feb 14,2017

Magnet holes on the universal axis

Fri Feb 10,2017

Wed Feb 9, 2017

Cleared up images of the exploded part diagram of the extruder

Tue Feb 8, 2017

edit


Mon Feb 7, 2017

Including time to learn how to convert .stl to solid objects. Got stuck in a "trap" for a while. The 2 motor .stl files had some extra unrelated faces hanging around that was causing the conversion to fail.

Working on D3D extruder Converted the Prusa .stl files to solid.

Mon Jan 16, 2017

File:Ash Tray.fcstd

Sun Jan 15, 2017

File:Ash Chamber.fcstd

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Polemidis_Log&oldid=149716"