File:Universal axis motor side.fcstd
Jump to navigation
Jump to search
Universal_axis_motor_side.fcstd (file size: 36 KB, MIME type: application/zip)
Warning: This file type may contain malicious code. By executing it, your system may be compromised.
Notes
- March 18, 2017 version reduced the depth of the holes to 4mm - so that m3x25 screws can be used without washers to mount the motor
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| 03:18, 27 February 2019 | (25 KB) | Marcin (talk | contribs) | Added bolt pattern and motor hole | |
| 03:26, 13 June 2017 | (4 KB) | Marcin (talk | contribs) | In correct location for x axis assembly. | |
| 01:00, 13 June 2017 | (5 KB) | Marcin (talk | contribs) | Simplified motor side no sketch (double sandwich). Shows nutcatchers on outside. | |
| 00:59, 13 June 2017 | (9 KB) | Marcin (talk | contribs) | Simplified motor side with sketch | |
| 21:20, 6 April 2017 | (221 KB) | Marcin (talk | contribs) | ||
| 23:33, 5 April 2017 | (214 KB) | Marcin (talk | contribs) | Reverted to version as of 22:17, 5 April 2017 | |
| 22:17, 5 April 2017 | (214 KB) | Polemidis (talk | contribs) | increased motor mounting holes by 0.5mm radius | |
| 02:23, 18 March 2017 | (143 KB) | Polemidis (talk | contribs) | Reduced motor mount holes to 4mm, kept nut catchers to 6mm | |
| 16:08, 18 February 2017 | (115 KB) | Marcin (talk | contribs) | Increased hole diameter from .24" to .26". Depth is the same. | |
| 02:57, 15 February 2017 | (115 KB) | Polemidis (talk | contribs) |
You cannot overwrite this file.