File:Universal axis motor side.fcstd

From Open Source Ecology
Revision as of 14:31, 5 April 2017 by Marcin (talk | contribs) (→‎Notes)
Jump to navigation Jump to search

Universal_axis_motor_side.fcstd ‎(file size: 36 KB, MIME type: application/zip)

Warning: This file type may contain malicious code. By executing it, your system may be compromised.

Notes

  • March 18, 2017 version reduced the depth of the holes to 4mm - so that m3x25 screws can be used without washers to mount the motor

File history

Click on a date/time to view the file as it appeared at that time.

(newest | oldest) View ( | older 10) (10 | 20 | 50 | 100 | 250 | 500)
Date/TimeDimensionsUserComment
02:23, 18 March 2017 (143 KB)Polemidis (talk | contribs)Reduced motor mount holes to 4mm, kept nut catchers to 6mm
16:08, 18 February 2017 (115 KB)Marcin (talk | contribs)Increased hole diameter from .24" to .26". Depth is the same.
02:57, 15 February 2017 (115 KB)Polemidis (talk | contribs)
(newest | oldest) View ( | older 10) (10 | 20 | 50 | 100 | 250 | 500)

You cannot overwrite this file.

Retrieved from "https://wiki.opensourceecology.org/index.php?title=File:Universal_axis_motor_side.fcstd&oldid=150263"