File:Controlpanel v1904.fcstd

From Open Source Ecology
Revision as of 21:57, 29 May 2019 by Marcin (talk | contribs)
Jump to navigation Jump to search

Controlpanel_v1904.fcstd(file size: 133 KB, MIME type: application/zip)

Warning: This file type may contain malicious code. By executing it, your system may be compromised.

Notes

  • Added hole in
  • Bend version history - Started with 14:18, 3 May 2019. Added the wire lock and trimmed edges for frame fit. To arrive at 15:55, 4 May 2019
  • Final simplified version as a single compound - 20:00, 3 May 2019. Ready to print.
  • Final version including sketches, without bend, is 13:17, 3 May 2019.
  • 11:37, 3 May 2019 is the final panel including components, but without the panel refinements for printing optimization (overhangs removal)
  • 5/3/2019 13:00 version is fine for printing on one print bed. Next versions are for vertical print and bend.
  • 5/3/2019 version compound without holes did not work - deletef it - if there are the twinkles in the object, it may be a shell only in STL form. Cura result was broken. Went back to the plain file, rebuilt side rails. I could not get the twinkle out while retaining full build.
  • Start with Control panel with everything in a pile.

Bugs

  • Note that version 19:14, 3 May 2019 is half the memory. It appears to be a compound, but is really a 'pseudocompound', meaning it can't be pocketed or padded. See FreeCAD Workarounds.

File history

Click on a date/time to view the file as it appeared at that time.

(newest | oldest) View ( | older 10) (10 | 20 | 50 | 100 | 250 | 500)
Date/TimeDimensionsUserComment
22:32, 2 May 2019 (739 KB)Marcin (talk | contribs)Reverted to version as of 21:48, 2 May 2019 (UTC)
21:48, 2 May 2019 (739 KB)Marcin (talk | contribs)Finished both side mounts.
21:45, 2 May 2019 (599 KB)Marcin (talk | contribs)Bottom mount complete. And left mount complete.
21:28, 2 May 2019 (544 KB)Marcin (talk | contribs)Started on bottom support
21:14, 2 May 2019 (502 KB)Marcin (talk | contribs)Added rail for the wire box.
20:56, 2 May 2019 (473 KB)Marcin (talk | contribs)Starting on wire box.
20:21, 2 May 2019 (472 KB)Marcin (talk | contribs)Added depth + wire lock.
19:26, 2 May 2019 (447 KB)Marcin (talk | contribs)Panel proper added.
14:45, 2 May 2019 (443 KB)Marcin (talk | contribs)Including 12" frame for reference.
23:27, 1 May 2019 (237 KB)Marcin (talk | contribs)Control panel with everything in a pile.
(newest | oldest) View ( | older 10) (10 | 20 | 50 | 100 | 250 | 500)