Controlpanel_v1904.fcstd ‎(file size: 133 KB, MIME type: application/zip)

Warning: This file type may contain malicious code. By executing it, your system may be compromised.

Notes

21:44, 29 October 2019 - added a bunch of holes to clean up wire routing, removed 1 unused hole.
Added hole in 16:57, 29 May 2019 but source for this is an exported STEP of former bent panel. Had issues poking out the hole.
Bend version history - Started with 14:18, 3 May 2019. Added the wire lock and trimmed edges for frame fit. To arrive at 15:55, 4 May 2019
Final simplified version as a single compound - 20:00, 3 May 2019. Ready to print.
Final version including sketches, without bend, is 13:17, 3 May 2019.
11:37, 3 May 2019 is the final panel including components, but without the panel refinements for printing optimization (overhangs removal)
5/3/2019 13:00 version is fine for printing on one print bed. Next versions are for vertical print and bend.
5/3/2019 version compound without holes did not work - deletef it - if there are the twinkles in the object, it may be a shell only in STL form. Cura result was broken. Went back to the plain file, rebuilt side rails. I could not get the twinkle out while retaining full build.
Start with Control panel with everything in a pile.

Bugs

Note that version 19:14, 3 May 2019 is half the memory. It appears to be a compound, but is really a 'pseudocompound', meaning it can't be pocketed or padded. See FreeCAD Workarounds.

Click on a date/time to view the file as it appeared at that time.

Date/Time	Dimensions	User	Comment
18:17, 3 May 2019	(404 KB)	Marcin (talk \| contribs)	Overhang touchup.
18:07, 3 May 2019	(256 KB)	Marcin (talk \| contribs)	Main overhangs removed.
18:00, 3 May 2019	(207 KB)	Marcin (talk \| contribs)	With rails rebuilt. Now for overhangs and bend.
17:50, 3 May 2019	(162 KB)	Marcin (talk \| contribs)	Returning to 'Control panel without components' and rebuilding side rails.
16:53, 3 May 2019	(64 KB)	Marcin (talk \| contribs)	Compound no holes
16:43, 3 May 2019	(441 KB)	Marcin (talk \| contribs)	Control panel without components
16:37, 3 May 2019	(883 KB)	Marcin (talk \| contribs)	Added part labels.
16:06, 3 May 2019	(883 KB)	Marcin (talk \| contribs)	Added side hole and expanded SD hole slightly.
14:30, 3 May 2019	(845 KB)	Marcin (talk \| contribs)	Front face holes added.
23:30, 2 May 2019	(804 KB)	Marcin (talk \| contribs)	Added cutout for GFCI, SD card, and LCD screen plugs

You cannot overwrite this file.

The following 9 pages use this file: