Latest revision as of 19:55, 18 January 2020

File Notes

This is the .26" hole version.
2 versions are available as of March 2019 - one with elongated thru hole for wiring, and other without this hole.
Wiring thru hole emerged since v19.02, where wire routing is simplified with this feature.

Error creating thumbnail: File missing

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	03:15, 3 November 2019	(281 KB)	Marcin (talk \| contribs)	1 mm wider belt peg hole
	20:55, 17 May 2019	(286 KB)	Marcin (talk \| contribs)	Standing up.
	00:04, 3 March 2019	(286 KB)	Marcin (talk \| contribs)	The most common version, no wiring hole.
	00:03, 3 March 2019	(282 KB)	Marcin (talk \| contribs)	Carriage with hole for thru wiring.
	15:51, 12 April 2017	(1.12 MB)	Marcin (talk \| contribs)	This is 4 of the carriages, nested to fit on a 6"x6" print surface such as Lulzbot Mini.
	23:53, 6 April 2017	(286 KB)	Marcin (talk \| contribs)	Turned it upside down so it's ready for printing as loaded.
	17:35, 6 March 2017	(286 KB)	Polemidis (talk \| contribs)
	09:45, 25 February 2017	(84 bytes)	Polemidis (talk \| contribs)	fixed uneven nut hole size.
	16:05, 18 February 2017	(278 KB)	Marcin (talk \| contribs)	This is the .26" hole version.

You cannot overwrite this file.

The following 13 pages use this file:

@@ Line 1: / Line 1: @@
-This is the .26" hole version.
+=File Notes=
+*This is the .26" hole version.
+*2 versions are available as of March 2019 - one with elongated thru hole for wiring, and other without this hole.
+*Wiring thru hole emerged since v19.02, where wire routing is simplified with this feature.
+=Production=
+*This is 1 mm nozzle, 0.6 mm wall thickness, 0.4 mm layers:
+[[File:carriage1and6.png|500px]]
+*Also tried 1.2 mm nozzle with 0.7 wall thick.