CEB instructionals CAD Requests

Please place a check () if you have placed the fab drawing on a page. You can either place a drawing on the page or email me the drawings at brianna (at) kufadesigns (dot) com and I can put them up.

All drawings should be labeled with part number and the name per the wiki.

They will eventually be uploaded to the2d cad page

Fab drawings

Note: we will eventually be doing 2d parts drawings for all components, so please also do the parts drawings for each part listed.

• Brick Holder Plate -100079-1
• Controller Mount-100084-1
• Dirt-Keeper Plate -100080-1
• Valve Mount-100051-1
• Arms - primary-100009-1(right) ,100010-1 (left)
  • We need hole punch diagrams, please do not show the hole where the grate supports (100091) attach, this will be torched later.
  • Please label each with either "right" or "left" arm.
  • IN PROCESS (12/13/11 - J ROGERS)
• Arms - secondary 100003 - show hole placement and where to weld leg holders.
  • IN PROCESS (12/13/11 - J ROGERS)
• Hopper sheet metal-Hopper Sheet Metal: (100060-1, 100061-1, 100062-1, 100062-2)
  • One big drawing with all of the sheet metal detailed (see examples on page. They need to be updated) Please note that the holes in the middle of 100060 will be torched upon installation.
  • How to cut for both 5x10 or 4x8 sheets
  • Exploded parts diagram of how to assemble hopper sheet metal with hinge plates (100064 series, 100065 series) and all bolts and nuts
  • One showing the spacing on how to weld together the whole hinge assembly
• Hopper mounting plate-Show where to punch holes before welding, and how to weld
  • IN PROCESS (12/13/11 - J ROGERS)
• Soil grate-100070-1 can see page for examples of what's needed.
  • Need for both "new" and "old" versions
  • Show where to torch holes in angle.- 100068-4, 10086-3
  • how to weld frame together- 100068-4, 10086-3, 100069-1, 10069-5
  • placement of rebars/flats and cross flat
• Soil Shaker motor unit- Exploded parts diagram on hydraulics
• Soil Shaker
  • All holes on bottom angle- 100042
  • All holes on top angle-100043
  • Guard plate cut-away detail- 100074
  • Hammer detail 100044,100045
  • Exploded parts of assembly (or something like assembly diagram on page)
• Soil loading drawer-100026- (in progress (ROB B 12-13-11)) 3D ones similar to those on page, showing how it's assembled., also a 2D view from above or below showing distances and placings.
• Roller guides- Expanded parts like on page (theres no group on CAD for entire roller guide assembly), 2D showing holes (100021)
• Main Cylinder Preparation
  • Upper Press foot hole diagram-100036
  • Lower Press foot hole diagram- 100035
  • Side view of prepared main cylinder-100038, 100039, those nuts there...
  • Expanded parts diagram with captions of hydraulic couplers
• Main Frame Preparation
  • Hole locations horizontal(100014) , and drawer members (100011).
  • Drawer adjustment nuts location (top side of 100011)Please do not show the outer holes which attach to the primary arms)
  • Hole locations vertical members 100115, 100015 Please label with what goes in there (sensor
  • Wide Cylinder supports 100108,100100
• Frame with main cylinder
  • Roller Guide placement expanded (see page, theres one there similar to what we want)
  • Side view showing placement of all U-channel and wide cylinder supports (100011,100014,100115,100015,100041, 100108,100100) and where to weld leg holders to them (100007)
• Hoses - Secondary cylinder hose unit-exploded parts diagrams

Updated Sketchup Models from CAD model

• Brick Holder Plate
• Controller Mount
• Dirt-keeper plate
• Valve Mount
• Arms - primary
• Arms - secondary
• Grate mounts
• Hopper supports
• Hopper sheet metal
• Hopper mounting plate
• Soil grate
• Soil Shaker motor unit
• Soil Shaker
• Soil loading drawer-
• Roller guides
• Main Cylinder Preparation
• Main Frame Preparation
  • Magnet Holder
  • Sensor Holders
  • Wide Cylinder Supports
  • Thin Cylinder Supports
  • Drawer Members
  • Vertical Member
  • Horizontal Members
• Frame with main cylinder
• Hoses - Secondary cylinder hose unit