Latest revision as of 07:14, 19 September 2011

Wanted: A list of the tools required to build the electrical parts of a CEB Press

Metalworking Tools

@@ Line 1: / Line 1: @@
 {{Template:CEB Press Manufacturing Instructions Navbox}}
-{{Wanted|A list of the tools required to build a CEB Press}}
+{{Wanted|A list of the tools required to build the electrical parts of a CEB Press}}
+=Metalworking Tools=
+==Heavy Machinery==
+*MIG or stick welder
+*Hole Punch
+**3/4" Dies
+**13/16" Dies
+**1" Dies
+*Oxy-Acetylene Torch
+*Mag-Drill
+**3/4" Bit
+**Between 7/8" and 1 1/16" Bit
+*Drill Press
+**1/2" Bit
+*Bandsaw
+==Basic Power Tools==
+*Angle Grinder- 7"
+**Grinding wheels
+*Angle Grinder- 4.5"
+**Grinding wheels
+**Cutting wheels
+*Hand Drill (suggested)
+**Reamer Bit
+==Hand Tools==
+*Squares
+**Speed Square
+**Large Square
+**Small Square
+*Measuring Tape
+*Metal Marking Chalk
+*Heavy Hammer
+*3/4" Transfer Punch
+*Spray Paint
+*Vise Clamps
+*C-Clamps
+*Wrenches
+**Crescent Wrench
+**Assorted Allen Wrenches
+**Suggested: 1 1/8", 3/4"
+*Ratchet
+*Sockets
+**1 1/8"
+**Suggested: 3/4"
+*Thread Tape