D3D Part Library: Difference between revisions
| Line 15: | Line 15: | ||
File:idlershort.jpg|[[File:check.png]]'''Short Idler Side''' - 75k - FreeCAD - [[File:Universal_Axis_Idler_Side_short_version.fcstd]]. STL - [[File:Universal_Axis_Idler_Side_short_version.stl]]. | File:idlershort.jpg|[[File:check.png]]'''Short Idler Side''' - 75k - FreeCAD - [[File:Universal_Axis_Idler_Side_short_version.fcstd]]. STL - [[File:Universal_Axis_Idler_Side_short_version.stl]]. | ||
File:peg85.jpg|[[File:check.png]]'''Belt Holding Peg''' - FreeCAD original size - [[File:peg_8mm_rods.fcstd]]. STL at 85% size, works well - [[File:peg_8mm_rods.stl]] | File:peg85.jpg|[[File:check.png]]'''Belt Holding Peg''' - FreeCAD original size - [[File:peg_8mm_rods.fcstd]]. STL at 85% size, works well - [[File:peg_8mm_rods.stl]] | ||
Revision as of 02:34, 16 May 2017
5/16" or 8 mm Rod Version
Hint: Once all the parts here are stable, we will create a FreeCAD D3D Workbench which includes a drag-and-drop of every part within FreeCAD
Small version for small machines such as 3D printer, small laser cutter, and CNC circuit mill
Motor Side of Axis - 221k - FreeCAD -File:Universal axis motor side.fcstd. STL - File:Universal axis motor side.stl
Carriage Side - 552k - FreeCAD - File:Universal axis carriage side.fcstd. STL - File:Universal axis carriage side.stl
Short Idler Side - 75k - FreeCAD - File:Universal Axis Idler Side short version.fcstd. STL - File:Universal Axis Idler Side short version.stl.
Belt Holding Peg - FreeCAD original size - File:Peg 8mm rods.fcstd. STL at 85% size, works well - File:Peg 8mm rods.stl
- Miniextruderholder.jpg
D3D Mini Extruder Holder File:Miniexthold.stl
D3D Extruder Holder. File:Motor interface.fcstd , File:Motor interface.stl
Endstop Holder. File:D3D End stop interface.fcstd ½ cube bumps, File:D3D End stop interface.stl.
Endstop. - FreeCAD - File:D3D End Stop Switch.fcstd
Sensor Holder. - Generated in BlocksCAD. STL - File:Sensholder.stl
- D3dframe freecad.jpg
Frame - FreeCAD -File:D3dframe.fcstd. STL - not 3d printer. Another version will be 3D printed.
Frame Extender - FreeCAD by Emmanouil Log - File:D3D Axis Extension.fcstd. STL - File:D3D Axis Extension.stl
Right Y Axis - FreeCAD - File:D3D Right Y Axis.fcstd.
'M6x18 Axis Hex Bolt - FreeCAD - File:M6x18.fcstd. Marcin plz confirm
M6x30 Axis Hex Bolt - FreeCAD - File:M6x30.fcstd. 30 mm version connecting X axis to Y axis. EDITED after Marcin's confirmation
Axis Hex Nut - FreeCAD - File:Axis hex nut freecad.fcstd.
Magnet - FreeCAD - File:Neodymium magnet freecad.fcstd. Magnet updated to 12mm×3mm
Flanged Bearing - goes on the idler 3D printed piece. FreeCAD - File:Pulley.fcstd.
- -----------------------------------------------------------------------------
- Extender.jpgFlanged Bearing - goes on the idler 3D printed piece. FreeCAD - File:Pulley.fcstd.
Carriage Linear Bearing - FreeCAD - File:Carriage linear bearing freecad.fcstd.
Nema 17 Stepper Motor - FreeCAD - File:Nema 17 stepper motor freecad.fcstd.
X Axis Belt - FreeCAD - File:8mm belt x axis freecad.fcstd. Belt needs to be 6 mm wide, 2mm pitch (GT2 belt)
- Previewfilename.jpg
Part name - FreeCAD - File:Freecadfilename.fcstd.
GT2 Pulley Freecad - File:GT2 pulley.fcstd.
Deprecated
Motor Side, short - File:Universal Axis Motor Side short version.fcstd.
20 Tooth Timing Pulley - FreeCAD - File:20 tooth pulley freecad.fcstd. This is an extruder driver gear, not 20 tooth pulley. See D3D BOM 2 Week BOM for the correct part.
Top extruder Mount - FreeCAD - File:D3D Mini Sub-Assembly Extruder Top Mount.fcstd. STL via BlocksCAD mod of FreeCAD STL export - File:TopExtrudermount.stl
Bigger Pictures
