CEB Press/Manufacturing Instructions/Hopper mounting plate: Difference between revisions
Jump to navigation
Jump to search
| Line 9: | Line 9: | ||
== Materials Required == | == Materials Required == | ||
*1/2”x3”x11 1/4” (2) | *1/2”x3”x11-1/4” (2) | ||
*1/2”x3”x15” (2) | *1/2”x3”x15” (2) | ||
Revision as of 05:47, 17 November 2011
| |||||||||||||||||||||||||
Tools Required
- Hole punch with 13/16" Die
- Welder
- Angle Grinder
Materials Required
- 1/2”x3”x11-1/4” (2)
- 1/2”x3”x15” (2)
Diagrams
Fabrication Steps
- Punch the 13/16" holes in the 15" pieces.
- Weld the pieces together, insuring everything is square. And there is a 6" space between the 15" pieces. Skip around so the plate doesnt warp.
- Weld both sides, then grind one smooth, so you can install it.