CEB Press/Manufacturing Instructions
This page is currently under construction and might undergo drastic changes within a short span of time.
- See Brianna's Log for updates on current developments in the CEB Production Run, and Recently Changed Pages
| CEB Press | ||
|---|---|---|
| Home | Research & Development | Bill of Materials | Manufacturing Instructions | User's Manual | User Reviews | 
| |
| |||||||||||||||||||||||||
This page is the starting point for making a CEB Press. The Fabrication section details the process of making the parts from raw materials, the Assembly section identifies the process of putting the parts together to form the machine, the Programming section deals with automating the process by using a microcontroller called an Arduino to control the hydraulic system, and the Testing section describes processes to perform to test the functionality of a CEB Press.
Fabrication
- Arms - primary
- Arms - secondary
- Feet
- Frame with main cylinder
- Grate mounts
- Hopper sheet metal
- Hopper mounting plate
- Hopper supports
- Hoses - Secondary cylinder hose unit
- Hoses - Shaker and main cylinder
- Hoses - Main hose unit
- Leg Holders
- Roller guides
- Secondary cylinder
- Secondary cylinder sensor unit
- Soil grate
- Soil loading drawer
- Soil Shaker motor unit
- Soil Shaker
OPTION:
Manual
Automatic
Assembly
Final Assembly and Job Site Setup
Programming
An Arduino is the microprocessor that controls the CEB Press's actions. It must be programmed with the CEB Press's unique program for making bricks.
Source code can be found at github: https://github.com/OSE/ceb-controller
Old code: